|Name:||Anionic Polyacrylamide||Trade Name:||Blufloc AA5516|
|Molecular Weight:||15-17Million||Charge Degree:||20-30%|
|Applications:||Mining, Water Treatment , Wastewater Treatment||Capacity:||2000t/m|
|Usage:||Water Treatment Chemicals,Coating Auxiliary Agents,Textile Auxiliary Agents,Plastic Auxiliary Agents||Cas No.:||9003-05-8,25085-02-3,C3H5ON|
|Other Names:||PAM,C3H5ON,anionic Polyacrylamide,Flocculant / PAM||Classification:||Chemical Auxiliary Agent|
cationic polyelectrolyte flocculants,
cationic polymer flocculant
Blufloc Polyacrylamide Flocculant for Phosphate Mine Flotation Application of High MW
In most mineral processes where there is a need for sedimentation, filtration or centrifugation then a flocculant or coagulant (also referred to as polymers) is often desired. The Blufloc AA5516 offers a broad spectrum of products ensuring maximum performance and cost efficiency in these applications. The main characteristics of the copolymers are: Molecular weight: 15 to 17 million, viscosity at 5 g/l: >1200 cps. They relate to water treatment and mining industry. They are also used as thickeners in the petroleum, textile, cosmetic and other industries.
Bluwat Chemicals manufactures and supplies specialty water treatment chemicals for oilfield, wastewater treatment, potable water, mineral processing, sugar and paper industries. The Blufloc range of anionic, cationic and non-ionic flocculants and coagulants are produced in China, our company's headquarters is in Yixing.
Blufloc flocculants and coagulants for mineral processing industries
The extensive range of Blufloc flocculants and coagulants includes anionic, non-ionic and cationic charged polymers, all produced at varying molecular weights, so that all applications in the mineral processing industry are catered for.
|Blufloc Anionic Polyacrylamide:|
|Trade Name:||Blufloc APAM|
|Chemical Name:||APAM Anionic Polyacrylamide|
|Port of Loading:||Shanghai Port, China|
|Delivery Time:||Within 10 Working Days After Got Your Payment|
|Package:||Packed in 25kgs kraft bag or white PE bag on pallet and 18-20ton/FCL, or 750kgs big bag|
|Applications:||Drilling, oil & gas, Enhanced oil recovery|
|Sample:||Free to test|
|Bulk Density:||About 0.6-0.8|
|Shelf Life:||2 years
Key Features and Benefits:
|1||High formation rate can increase dewatering capacity by 10-30 %.|
|2||It can make the cake moisture content lowers, reduce incineration fuel by 10-20 %.|
|3||Improved separability of cake from filter cloth can improved the filter life.|
|4||Blufloc AA5414 displays marked effects also on putrefied sludge, enabling stable operation..|
|5||Breakage of floc decreases and the separation efficiency at the decanter is improved.|
Applications for our products are found in many industries including
How To Use Polyacrylamide?
Application and Dosage:
The dosage range of varies from 0.2 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage.
Put sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the floc properly at this time and note the sedimentation and clarity of top solution.
Keywords: flocculants and coagulants,processing industries, mineral processing industry, enhanced oil recovery, processing industries, treatment of sewage,produced in china
Contact Person: Mr. Eric Min