|Product Name:||Anionic Polyacrylamide Emulsion||Application:||Water Treatment, Paper Making, Mining, Textile, Sugar And Drilling|
|Molecular Weight:||High||Charge Degree:||Medium|
|CAS No.:||9003-05-8||Another Names:||Polymer Flocculant, Polyelectrolyte, APAM|
|Standard:||GB 17514-2008||Sample:||Free Test|
|Port:||Shanghai Port, China||Emulsion:||White Milky|
water treatment chemicals,
water treatment agent
Anionic Polyacrylamide Emulsion for Water Purifying Medium Molecular Weight Polymer
, CAS No. 9003-05-8 EA-6518 Grade
Description of Anionic Polyacrylamide EA-6518 White Emulsion
Specific Gravity at 25°C:
PH (1% aqua solution):
Storage Temperature (°C):
0 - 35
|As flocculants for raw water sedimentation, thickening and suspending removal|
water purification chemicals Used for acidophilic water systems. If matched with PAC, aluminum sulphate,
Dosing polyacrylamide can reduce the consumption of coagulant and speed up
Coal washing tailing centrifugal separation
Used as fixing agent, residency agent, filtration aid and paper dry and wet
Textile Sizing, as a kind of composition for chemical grout, starch textiles
Can be used directly, dont need to mix.
Economical to use - lower dosage levels.
Non corrosive of suggested dosage, economical and effective at low levels.
Can eliminate the use of alum & further ferric salts when used as primary coagulants.
Reduction in sludge of dewatering process system.
Faster sedimentation, better flocculation.
Non-pollution (no aluminum, chlorine, heavy metal ions etc.).
10 years manufacturing experience, with more than 20 technical engineers
The dosage range of varies from 1 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage.
Put sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the flocs properly at this time and note the sedimentation and clarity of top solution.
Package and Storage
Packed in 25kg plastic drums, or 1000kg IBC drums
Stored in original packaging in cool and dry place, away from sources of heat, flame and direct sunlight.
Anionic Polyacrylamide Emulsion Picture:
Contact Person: Mr. Eric Min