|Chemical Name:||Anionic Polyacrylamide||Trade Name:||Blufloc EC8030|
|Molecular Weight:||10-12Million||Charge Degree:||20-30%|
|Applications:||Gold Mine Flotation||Capacity:||2000t/m|
waste water treatment chemicals,
Oily Wastewater Sludge Dehydration Polyelectrolyte Flocculant of Liquid Anionic Emulsion
In addition to our complete range of powder grade polyacrylamides, marketed under the Blufloc trade name, our company also supplies polydadmacs (in both powder and liquid form) and polyamine liquid coagulants to cater for all requirements of the industries that we serve. Liquid dispersion polymers will be manufactured in Yixing.
Acrylamide production from microbiological technology
Blufloc flocculants and coagulants for mineral processing industries
The extensive range of Blufloc flocculants and coagulants includes anionic, non-ionic and cationic charged polymers, all produced at varying molecular weights, so that all applications in the mineral processing industry are catered for.
|How to Choose Polyacrylamide for Your Application?|
|Blufloc Anionic Polyacrylamide:|
|Trade Name:||Blufloc APAM|
|Active Ingredient:||High molecular weight polymer|
|Chemical Name:||APAM Anionic Polyacrylamide|
|Port of Loading:||Shanghai Port, China|
|Delivery Time:||Within 10 Working Days After Got Your Payment|
|Applications:||Drilling, oil & gas, Enhanced oil recovery|
|Sample:||Free to test|
|Bulk Density:||About 1.0-1.1|
Key Features and Benefits:
|1||High formation rate can increase dewatering capacity by 10-30 %.|
|2||It can make the cake moisture content lowers, reduce incineration fuel by 10-20 %.|
|3||Improved separability of cake from filter cloth can improved the filter life.|
|4||Blufloc AA5414 displays marked effects also on putrefied sludge, enabling stable operation..|
|5||Breakage of floc decreases and the separation efficiency at the decanter is improved.|
How To Use The Blufloc Polyacrylamide?
Application and Dosage:
The dosage range of varies from 0.2 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage.
Put sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the floc properly at this time and note the sedimentation and clarity of top solution.
Contact Person: Mr. Eric Min