|Product Name:||BWD-01 Water Decoloring Agent||Component:||Dicyandiamide-formaldehyde Resin|
|Sample:||Free Of 500gram||Package:||30kgs, 50kgs, 250kgs, 1250kgs Drums|
|Production Capacity:||50000tons/y||Manufacturer:||Yixing Bluwat Chemical Co Ltd|
textile printing chemicals,
Decolouring Agent Water Clarifying Agent Water Purifying Agents Wastewater Treatment in Paint Industry
BWD-01 water decoloring agent is mainly used for Color removal treatment for high-colority effluent from textile dyeing & printing mills, dyestuffs & pigment mills, ink & paper making mills.
It is suitable to treat waste water with Reactive dye, Acid dye, Disperse dye, Direct dye, Sulphur dye, Vat dye etc..
Can be used in the production process of paper & pulp as retention agent.
High performance to treat wastewater with Reactive, Acid, Disperse, Direct Dyestuff etc. (Soluble and Insoluble dyestuffs).
Stronger decolorization (50%~99%) and removal of COD (50%~80%).
Used to treat wastewater from textile and dyeing industry, pigment industry, printing ink industry and paper industry.
Faster sedimentation, better flocculation.
Non-pollution (no aluminum, chlorine, heavy metal ions etc.).
It can be used before or after biological treatment.
Less sludge produced than other inorganic coagulants.
|Appearance:||Colorless viscosy liquid,|
|PH Value (30% Solution):||3-6|
|Solubility:||Soluble With Water at Any Rate|
Make solution of BWD-01, mix with 40 times water to have 2.5% solution for use.
Make PAC solution, 2-5% Al2O3
Have solution of Anionic Polyelectrolyte, 0.1%.
Have effluent, test pH value, adjust pH value to 8-9.(It is very important, higher or lower pH, BWD-01 works not well)
Add PAC solution, mix with effluent completely. about 1-3 minutes
Add BWD-01 solution, mix with effluent completely, about 5-10 minutes
Add small content of anionic polyelectrolyte solution, mix slowly to have big floc. (this step is a suggestion)
Check color for treated effluent
Adjust dosage of BWD-01 and PAC to do more test to have better testing result.
Package and Storage:
Contact Person: Mr. Eric Min