|Color:||Light Yellow||Application:||Water Treatment Chemicals Organic Flocculant|
|Another Name:||PAC||Product:||Polyaluminium Chloride|
organic flocculants poly aluminium chloride,
poly aluminium chloride organic flocculants,
poly aluminium chloride in water treatment
Poly Aluminium Chloride In Water Treatment Poly Aluminium Chloride Suppliers Organic Flocculants
PAC-02 Polyaluminium Chloride is used for drinking water and wastewater treatment.
PAC Product Introduction:
This product is a kind of inorganic polymer flocculant. Mainly through compression double, adsorption electricity neutralization, adsorption Bridges, sediment trap, etc mechanism function, make edema subtle aerosols and colloidal ions off firm, gathered, flocculation, coagulation, precipitation to purify the treatment effect.
Polyaluminium chloride Features:
1) Spray dryer type
2) Used for drinking water treatment and wastewater treatment.
3) Appearance: Solid powder, yellow
|Cr 6+||0.00015% max|
Polyaluminum Chloride Packing&Storage:
25kg/PP woven bag with an inner plastic bag
The product shall be sealed and stored in the dry and ventilated place to prevent it from rain, high temperature, and strong sunlight. The shelf life of the product is 24 months.
Polyaluminium Chloride Advantages:
1. Its purifying effect on low-temperature, low-turbidity and heavily organic-polluted raw water is much better than other organic flocculants, furthermore, the treatment cost is lowered by
2. It can lead to quick formation of floc (especially at low temperature) with big size and rapid precipitation service life of cellular filter of the sedimentation basin.
3. The dosage is smaller than that of other flocculants, which is better for improving the quality of treated water.
4. It has wide range adaptability to the waters at different temperatures (in the summer and the winter) and in different regions (in the south and the north of China).
5. It is suitable for the automatic dosing device of alum.
6. It can adapt to a wide range of pH values (59) and can reduce the pH value and basicity after processing.
1. The user can allocate remedy concentration by test and determine the optimum dosage according to different to be added after they are dissolved and diluted.
2. The dilution ratio of liquid product is 5-50% and the dilution ratio of the solid product is 2-20%.
3. The liquid product dosage is 3-40kg/1000 tons of water and solid product dosage is 1-15kg/1000 tons of water.
4. The amount of specific dosing is based on coagulation tests and experiments.
keywords:polyaluminium chloride pac, use of poly aluminium chloride in water treatment, poly aluminium chloride, poly aluminium chloride, pac dosing in water treatment
Contact Person: Mr. Eric Min