Etp Quaternary Ammonium Effluent Decoloring Agent 55295-98-2

1

High-performance treating high-coloring effluent from textile dyeing mills, pigment mills, printing ink, and paper mils.

2

As flocculant to de-color high-coloring effluent from dyestuffs processing plants.

3

Stronger decolorization (50%~99%) and removal of COD (50%~80%).

4

Can be used as retention agent in paper & pulp processing

5

Faster sedimentation, better flocculation.

6

Non-pollution (no aluminum, chlorine, heavy metal ions, etc.).

7

It can be used before or after biological treatment.

8

Less sludge is produced than other inorganic coagulants.

1

Before use, make BWD-01 with fresh water 40-50 times, to have a 2-2.5% concentration solution.

2

Make PAC solution with 2-5% Al2O3 content.

3

Make a solution of Anionic flocculant with 0.1% concentration.

4

It is very important, to adjust the effluent pH value to 8-10, with higher or lower pH, BWD-01 works not well.

5

Add PAC solution, and mix with effluent completely. about 1-3 minutes

6

Add BWD-01 solution, mix with effluent completely, about 5-10 minutes

7

Add a small content of anionic polyelectrolyte solution, and mix slowly to have a big floc. (This step is a suggestion)

8

Sedimentation

9

Check the color of treated effluent

10

Adjust the dosage of BWD-01 and PAC to do more tests to have better testing results.