CPAM Cationic Polyacrylamide , Industrial Water Treatment Flocculant

Appearance:

Off-White Granular Powder

Ionic Charge:

Cationic

Particle Size:

20-100 mesh

Molecular Weight:

High

Charge Degree:

Low

Solid Content:

89% Min

Approximate Brookfield viscosity at 25° C:

@ 1.0%

>1500

@ 0.50%

>600

@ 0.25%

>300

Bulk Density:

About 0.6-0.8

Specific Gravity at 25°C:

1.01-1.1

Recommended 

Working Concentration:

0.1-0.5%

PH (1% aqua solution):

4-6

Storage Temperature (°C): 

0 - 35

Shelf Life:

2 years

1

Raw water treatment

Can be used as flocculant for sedimentation, thickening and suspending removal for the raw water, such as industry water, river water, rain water etc.

2

Sewage Water Treatment

For sewage water solid/liquid separation, if matched with PAC or aluminum sulphate, the effect will be excellent, also used for sludge dewatering.

3

Industrial Wastewater Treatment

Dosing polyacrylamide to removal suspended solids, and can reduce the consumption of coagulant and speed up sedimentation.

4

Coal Mine

Washing

5

Paper-making

Cationic polyacrylamide is used as residency agent, filtration aid and paper dry and wet intensity reinforcing agent in paper-making industry.

6

Sand Prevention Solidification

Dissolved into 0.3% concentration and cross-linking agent added. It can be sprayed on desert to prevent and solidify sand.

7

Sugar and juice mills

For sugar and juice wastewater clarification and sludge dewatering.

1

Professional manufacturer for Cation Polyacrylamide, with High molecular weight.

2

Highly effective across a wide range of applications including
mechanical dewatering, thickening, flotation, and clarification.
Operation over a wide pH range (4-9).

3

Cationic polyacrylamide powder form is easily soluble in water, dissolves rapidly.

4

Non corrosive of suggested dosage, economical and effective at low levels.

5

It can eliminate the use of alum & further ferric salts when used as primary coagulants.

6

Perfect performance in sludge dewatering process system, and DAF system.

7

Faster sedimentation, better flocculation.

8

Non-pollution (no aluminum, chlorine, heavy metal ions etc.).

9

10 years manufacturing experience, with more than 20 technical engineers

1

Dissolving concentration:

We suggest to dissolve it as 0.1-0.5% concentration standardly. 

2

Dissolving time:

Dissolving time is according to the water quality, temperature and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. Incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant. 

3

Agitation speed: 

Idea revolution agitator is between 200-400rpm, if a high speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.

4

Application and Dosage:

The dosage range of varies from 1 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage.

5

Jar Test: 

Put wastewater sample in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the flocs properly at this time and note the sedimentation and clarity of top solution.