Industrial Water Treatment Chemicals Blufloc Water Decoloring BWD-01 CAS 55295-98-2

Description:

It has high color removal of beverage wastewater, by providing a large number of cations, the negative charge is brought on dye molecules are neutralized instability, at the same time with BWD-01 Water Decoloring Agent by a large number of hydrolysis of flocs. Can be adsorbed dye, destabilization of the snare, from water separation, so as to achieve the purpose of bleaching.

BLUWAT is biggest producer of water decoloring agent in the world, annual export is more than 30000tons to more than 50 countries.

Appearance:

Colorless and Translucid Liquid

Solid Content:     

50%min

 Viscosity(25°C, cps):

50-300

PH Value (30% Water Solution):

3-6

Specific Gravity (at 20°C):

1.1-1.3 

Water Solubility:

Completely Soluble With Water at Any Rate

Package:

30kgs net plastic drum, 250kgs net plastic drum palletized, 1250kgs net IBC drum

Storage Temperature:

Room temperature 

1

High performance treating high-colority effluent from textile dyeing mills, pigment mills, printing ink and paper mils.

2

As flocculant to de-color high-colority effluent from dyestuffs processing plants.

3

Stronger decolorization (50%~99%) and removal of COD (50%~80%).

4

Can ben used as retention agent in the paper & pulp processing

5

Faster sedimentation, better flocculation.

6

Non-pollution (no aluminum, chlorine, heavy metal ions etc.).

7

It can be used before or after biological treatment.

8

Less sludge produced than other inorganic coagulants.

1

Before use, to make BWD-01 with fresh water 40-50times, to have 2-2.5% concentration solution.

2

Make PAC solution with 2-5% Al2O3 content.

3

Make solution of Anionic flocculant with 0.1% concentration.

4

It is very important, to adjust the effluent pH value to 8-10, higher or lower pH, BWD-01 works not well.

5

Add PAC solution, mix with effluent completely. about 1-3 minutes

6

Add BWD-01 solution, mix with effluent completely, about 5-10 minutes

7

Add small content of anionic polyelectrolyte solution, mix slowly to have big floc. (this step is suggestion)

8

Sedimentation

9

Check color for treated effluent

10

Adjust dosage of BWD-01 and PAC to do more test to have better testing result.

1. Packed in 30kgs, 50kgs, 250kgs net plastic drums and 1250kgs net IBC drums, or others according to the requirements of clients.
2. Suggested to store in room temperature, would show slightly stratification or appear white at low temperature, cannot be placed in the sun.