Emulsion Coagulants And Flocculants For Filtration Settling Washing / Dewatering

Jar Test:

Put a sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60 rpm. Determine the floc properly at this time and note the sedimentation and clarity of the top solution.

Procedure and precautions upon dispersion and dissolving flocculants:
Dissolving time:

The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature, and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. An incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant.

Agitation speed:

The ideal revolution of the agitator is between 200-400rpm. A high-speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant.

Dissolving concentration:

Should be standardly dissolved to 0.1-0.2% concentration.

Handling measures and precautions:
Proper human safety products such as Splash goggles, lab coats, vapor respirators, gloves, and boots should be worn while handling and applying chemicals. Splashes on the skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer to MSDS for more details.

• Easily soluble in water; dissolves rapidly.

• Noncorrosive of suggested dosage, economical, and effective at low levels.

• Can eliminate the use of alum & further ferric salts when used as primary coagulants.

• Faster sedimentation, better flocculation.

• Non-pollution (no aluminum, chlorine, heavy metal ions, etc.).

• 10 years of manufacturing experience, with more than 20 technical engineers

• BWD-01 Water Decoloring Agent, for color removal for textile dyeing wastewater treatment and for other wastewater.
• Poly Aluminium Chloride(PAC), for drinking water treatment for wastewater treatment.
• Polyacrylamide (PAM)/Polyelectrolyte, for water treatment, for sludge treatment.
• PHPA(Partially Hydrolyzed Polyacrylamide) For Drilling, for drilling mud additive in the oilfield.
• Ferric Sulphate, for drinking water and wastewater treatment.
• PolyDADMAC, for water treatment and for paper mills, and for cosmetics.
• Polyamine, for drinking and wastewater treatment, sludge dewatering, paper making, and oilfield.
• Aluminum Chlorohydrate(ACH) liquid & powder, for drinking water treatment and other fields.

A:

We can provide a certain quantity of free samples.

Give us your FedEx account to arrange a sample.

Place order to FedEx.

A:

Give us your exact quantity, packing, destination, port, or specs requirements to quote the price.

A:

The best way to request a sample to test is after confirmation, you can place a trial order.

A:

No problem, we would like to grow up together.

A:

We can provide application methods to you.

A:

We discuss to be an agent after some orders and trust.

A:

Yes, we have provided OEM service to lots of big and famous companies in the order.

A:

500kgs of MOQ.

A:

More than 50000 tons annually year.

A:

Quality is the life of our company, in the past 15 years, quality brings us benefits and gives us vitality.

We can ensure quality consistency.

If you still don't trust us, you can request a third part company, such as SGS, to inspect and test the bulk cargo before shipment(you should bear the inspection expense).