|Product Name:||Anionic Polyacrylamide/pam/polyelectrolyte||Application:||Water Treatment, Paper Making, Mining, Textile, Sugar And Drilling|
|Molecular Weight:||Medium High||Charge Degree:||Medium Low|
|CAS No.:||9003-05-8||Standard:||GB 17514-2008|
|Sample:||Free Test||Port:||Shanghai Port, China|
cationic polymer flocculant
Blufloc Polyacrylamide in Sugar Industry:
|Trade Name:||Anionic / Flocculant / Polyelectrolyte / APAM|
|Active Ingredient:||High molecular weight polymer|
|Chemical Name:||Anionic Polyacrylamide / Polyelectrolyte / Flocculant /|
|Equivalent to:||LT25, LT25, Chemfloc LT27, 605 etc|
|Port of Loading:||Shanghai Port, China|
|Delivery Time:||Within 10 Working Days After Got Your Payment|
|Package:||Packed in 25kgs kraft bag or white PE bag on pallet and 18-20ton/FCL, or 750kgs big bag|
|Applications:||Sugar clarification, sedimentation and flotation|
|Sample:||Free to test|
|Blufloc AS5615 Polyacrylamide Specifications:|
|Appearance:||Off-White Granular Powder|
|Molecular Weight:||Medium high|
|Hydrolysis Degree:||Medium low|
|Bulk Density:||About 0.6-0.8|
|Specific Gravity at 25°C:||1.01-1.1|
|Recommended Working Concentration:||0.1-0.5%|
|PH (1% aqua solution):||6-9|
Melt Raw Sugar Flotation:
Blufloc AS5615 Grade Competitive Advantage:
|1||Medium Molecular Weight and high Charge Degree.|
Economical to use - lower dosage levels.
|3||For Water treatment as flocculant to make flocs|
Easily soluble in water; dissolves rapidly.
Non corrosive of suggested dosage, economical and effective at low levels.
10 years manufacturing experience, with more than 20 technical engineers
Blufloc AS5615 Grade Application Methods:
Polyacrylamdie (polyelectrolyte/flocculant) should be standardly be dissolved to 0.1-0.5% concentration.
The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. Incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant.
The ideal revolution of the agitator is between 200-400rpm. A high speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.
The dosage range of varies from 1 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage.
Put sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the flocs properly at this time and note the sedimentation and clarity of top solution.
Blufloc AS5615 Grade Package and Storage:
Contact Person: Mr. Eric Min