|Chemical Name:||Anionic Polyacrylamide||Molecular Weight:||Low To High|
|Charge Degree:||Low To Higt||Applications:||Water Treatment , Sludge Dewatering|
|Capacity:||2000t/m||Usage:||Water Treatment Chemicals|
|Cas No.:||9003-05-8||Application:||Waste Water Treatment,Water Treatment Chimicals,Sewage Water Treatment,Coal Mine Washing,paper Sludge Dewatering|
|Color:||White||Molecular Weight:||5-25 Million|
cationic polymer flocculant
Blufloc Cationic Polyacrylamide, is a solid powder, water-soluble polymer with varying molecular weight and charge density.
It is most often used in sludge dewatering, water clarifying, or to encourage flocculation of particles present in water and allow rapid settlement of finely suspended solids.
It is a synthetic chemical that can be tailored to fit a broad range of applications.
It is a synthetic chemical that can be used in the dewatering process
|Products:||Molecular Weight:||Anionic Degree:|
The copolymer of acrylamide and
|AA5415||Medium High||Medium Low|
|AA5315||Medium High||Medium Low|
|AA5412||Medium Low||Medium Low|
|For Oil||HAA5412||Medium Low||Medium Low|
|HAA6520||Ultra High||Medium High|
Blufloc PAM Competitive Advantage:
|1||Productivity: Over 50000mt annual.|
|2||Easily soluble in water; dissolves rapidly.|
|3||Noncorrosive of suggested dosage, economical, and effective at low levels.|
|4||Can eliminate the use of alum & further ferric salts when used as primary coagulants.|
|5||Reduction in the sludge of the dewatering process system.|
|6||Faster sedimentation, better flocculation.|
|7||Non-pollution (no aluminum, chlorine, heavy metal ions, etc.).|
10 years of manufacturing experience, with more than 20 technical engineers
How To Use Blufloc Polyacrylamide?
Application and Dosage:
The dosage range varies from 0.2 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage.
Put a sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm, and then slowly agitate at 60rpm. Determine the floc properly at this time and note the sedimentation and clarity of the top solution.
Contact Person: Mr. Eric Min