Decolorant Water Purification Agent Color Remove Chemcials 55295-98-2

Appearance:

Colorless and Translucid Liquid

Solid Content:     

50%min

 Viscosity(25°C, cps):

50-300

PH Value (30% Water Solution):

3-6

Specific Gravity (at 20°C):

1.1-1.3 

Water Solubility:

Completely Soluble With Water at Any Rate

Package:

30kgs net plastic drum, 250kgs net plastic drum palletized, 1250kgs net IBC drum

Storage Temperature:

Room temperature 

1

Make BWD-01 solution, and mix with 40 times water to have 2.5% solution for use.

2

Make PAC solution, 2-5% Al2O3

3

Make a solution of Anionic Polyelectrolyte, 0.1%.

4

Prepare the effluent, test pH value, and adjust pH value to 8-9. (It is very important, higher or lower pH, BWD-01 works not well)

5

Add PAC solution, and mix with effluent completely. about 1-3 minutes

6

Add BWD-01 solution, and mix with effluent completely, about 5-10 minutes

7

Add small content of anionic polyelectrolyte solution, and mix slowly to have a big floc. (this step is a suggestion)

8

Sedimentation

9

Check the color of treated effluent

10

Adjust the dosage of BWD-01 and PAC to do more tests to have better testing results.

1. Packed in 30kgs, 50kgs, 250kgs net plastic drums, and 1250kgs net IBC drums, or others according to the requirements of clients.
2. Suggested to store at room temperature, would show slight stratification or appear white at low temperature, cannot be placed in the sun.