Mining Anionic Polyacrylamide Flocculants PAM Emulsion For Sedimentation

Appearance:

white emulsion

Ionic Charge:

Anionic

Molecular Weight:

High

Hydrolysis Degree:

Medium

Solid Content:

35-40%

Specific Gravity at 25°C:

1.01-1.1

Recommended 

Working Concentration:

0.1-0.5%

PH (1% aqua solution):

6-9

Storage Temperature (°C): 

0 - 35

Shelf Life:

1 years

1

Raw water 
treatment

2

Sewage Water 
Treatment

Used for acidophilic water systems. If matched with PAC, aluminum sulphate,
the effect will be excellent.

3

Industrial 
Wastewater 
Treatment

Dosing polyacrylamide can reduce the consumption of coagulant and speed up 
sedimentation.

4

Coal Mine
Washing

Coal washing tailing centrifugal separation
Sedimentation and filtration of coal powder and coal mud.
Highly improve the recovery rate of coal powder and the filtration speed.

5

Paper-making

Used as fixing agent, residency agent, filtration aid and paper dry and wet
intensity reinforcing agent in paper-making industry.

6

Oil field

Oil field profile controlling and water- plugging agent, matched with lignocellulose
and a certain amount of chemical adhesive added. It can be used as oil field profile
controlling and water-plugging agent.

7

Well Drilling 
Mud Additives

In oil field, as a kind of mud additives.
To increase the viscosity of water and improve the effectiveness of the water flooding 
process.

8

Soil humectants

It can preserve water and solidify sand for soil and can play a role of humectant on slope grass planting, tree planting, and sand solidification and dust prevention of soil.

9

Textile

Textile Sizing, as a kind of composition for chemical grout, starch textiles
Highly improve the adhesive property, penetrability and desizing performance, enable the textile to have electrostatic prevention performance, reduces the desizing rate, and reduces the starch mixing spots, cloth machine breaking efficiency, and falling objects.

1

Economical to use - lower dosage levels.

2

Can be used directly, dont need to mix.

3

Non corrosive of suggested dosage, economical and effective at low levels.

4

Can eliminate the use of alum & further ferric salts when used as primary coagulants.

5

Reduction in sludge of dewatering process system.

6

Faster sedimentation, better flocculation.

7

Non-pollution (no aluminum, chlorine, heavy metal ions etc.).

8

10 years manufacturing experience, with more than 20 technical engineers

1

Application 
and Dosage:

The dosage range of varies from 1 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage.

2

Jar Test: 

Put sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the flocs properly at this time and note the sedimentation and clarity of top solution.