Product Details:
|
Product Name: | BWD-01 Water Decoloring Agent | Component: | Dicyandiamide-formaldehyde Resin |
---|---|---|---|
Solid Content: | >50% | CAS No.: | 55295-98-2 |
Other Name: | Color Removal Chemicals | Application: | Textile Effluent Color Treatment |
Sample: | Free To Test | Production Capacity: | 50000tons/y |
High Light: | decolorizing agent,cod chemicals |
BWD-01 Water Decoloring Agent is specially working high performance with the dyeing wastewater containing the hydrophilic dyes (reactive dyes, acid dyes, disperse dyes, etc.), less dosage, the color clear, fast speed, high processing liquid clarification of the settlement, but also reduce the composition of COD.
Description:
Specifications:
Product Name: | BWD-01 Water Decoloring Agent |
Cas No.: | 55295-98-2 |
Appearance: |
Colorless translucid liquid |
Solid Content: |
≥50% |
Specific Gravity at 20°C: |
1.1-1.3 |
PH Value (30% Solution): |
3-6 |
Viscosity(25°C,cps): |
50-300 |
Solubility: |
Soluble With Water at Any Rate |
Package: |
30kgs, 250kgs, 1250kgs net IBC drum |
Storage Temperature: |
Room temperature(10-35℃) |
Application Fields:
Competitive Advantage:
1 |
Has stronger decolorization (50%~99%) and removal of COD (50%~80%) for different dye effluent. |
2 |
Used to de-color high-coloring effluent from dyestuffs plants. |
3 |
High performance to treat wastewater with Reactive, Acid, Disperse, Direct Dyestuff, etc. (Soluble and Insoluble dyestuffs). |
4 |
Used to treat wastewater from the textile and dyeing industry, pigment industry, printing ink industry, and paper industry. |
5 |
Used as a retention agent in the paper & pulp processing |
6 |
Faster sedimentation, better flocculation. |
7 |
Non-pollution (no aluminum, chlorine, heavy metal ions etc.). |
8 |
It can be used before or after biological treatment. |
9 |
Less sludge is produced than other inorganic coagulants. |
Application Methods:
1 |
Before use, suggest making a solution of BWD-01, and mix it with 40 times water to have a 2.5% solution. |
2 |
Make PAC solution, 2-5% Al2O3 |
3 |
Have a solution of Anionic Polyelectrolyte, 0.1%. |
4 |
Have effluent, test pH value, and adjust pH value to 8-9. (It is very important, higher or lower pH, BWD-01 works not well) |
5 |
Add PAC solution, and mix with effluent completely. about 1-3 minutes |
6 |
Add BWD-01 solution, mix with effluent completely, about 5-10 minutes |
7 |
Add small content of anionic polyelectrolyte solution, and mix slowly to have big floc. (this step is a suggestion) |
8 |
Sedimentation |
9 |
Check color for treated effluent |
10 |
Adjust the dosage of BWD-01 and PAC to do more tests to have a better testing result. |
Package and Storage:
keywords: textile wastewater treatment, flocculation water treatment, water purifying agents, industrial wastewater treatment, the chemical used for purification of water
Contact Person: Mr. Eric Min
Tel: +8613861499902