|Product Name:||Anionic Polyacrylamide/pam/polyelectrolyte||Application:||Water Treatment, Paper Making, Mining, Textile, Sugar And Drilling|
|Molecular Weight:||Medium||Charge Degree:||Medium|
|CAS No.:||9003-05-8||Another Names:||Polymer Flocculant, Polyelectrolyte, APAM|
|Standard:||GB 17514-2008||Sample:||Free Test|
|Port:||Shanghai Port, China||White:||Granular|
cationic polyelectrolyte flocculants,
cationic polymer flocculant
Blufloc A-4515 Anionic Polyacrylamide/PAM Medium Molecular Weight Polymer , CAS No. 9003-05-8
Blufloc A-4515 Description:
Bluwat Blufloc A-4515 Specifications:
Off-White Granular Powder
Low to Medium
Approximate Brookfield viscosity at 25° C:
Specific Gravity at 25°C:
PH (1% aqua solution):
Storage Temperature (°C):
0 - 35
Blufloc A-4515 Application Fields:
As flocculants for water treatment
Thickening agent for Textile printing and coating
Coal washing and sedimentation
Wet strengthening agent, resident agent for paper making
Drilling mud additive for oilfield
Sugar Refining and juice clarifying
Fluid loss control
Blufloc A-4515 Competitive Advantage:
Economical to use - lower dosage levels.
Easily soluble in water; dissolves rapidly.
Reduction in sludge of dewatering process system.
Faster sedimentation, better flocculation.
Productivity over 65000mt annual
10 years manufacturing experience, with more than 20 technical engineers
Blufloc A-4515 Application Methods:
Polyacrylamdie (polyelectrolyte/flocculant) should be standardly be dissolved to 0.1-0.5% concentration.
The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. Incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant.
The ideal revolution of the agitator is between 200-400rpm. A high speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.
The dosage range of varies from 1 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage.
Put sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the flocs properly at this time and note the sedimentation and clarity of top solution.
Blufloc A-4515 Package and Storage:
Blufloc A-4515 Anionic Polyacrylamide Picture
Contact Person: Mr. Eric Min