Screw Sludge Dewatering Flocculant CPAM C9060 Cationic Polyacrylamide

Blufloc CPAM Description:

1. It is the Cationic Polyacrylamide with High Molecular Weight and Medium Charge Degree equivalent to F O-  4290 for sludge dewatering with Screw Sludge Dewatering Machine.
2. It have the high performance for sludge dewatering with the screw sludge dewatering machine in small dosage and economic treatment cost;
3. Soluble in water, safe, non-toxic, hydrolytic stability, is not sensitive to the change of pH value, anti-chlorine. Harmless, no-flammable and non-explosive, it can be stored at room temperature, it cannot be placed in the sun. It is slightly acidic, when skin contact, wash immediately with plenty of water.
4. It used as the oil drilling additive in oilfield. The role of PAM is to adjust drilling fluid rheology, carrying cuttings, drilling bit lubrication, favorable. In addition, it can greatly reduce the accident, reduce the abrasion of equipment, and can prevent the occurrence of hole leakage and collapse, the caliper rules.

Appearance:

Off-White Granular Powder

Ionic Charge:

Cationic

Particle Size:

20-100 mesh

Molecular Weight:

High

Hydrolysis Degree:

Medium-High

Solid Content:

89% Min

Approximate Brookfield viscosity at 25° C:

@ 1.0%

>2000

@ 0.50%

>800

@ 0.25%

>400

Bulk Density:

About 0.6-0.8

Specific Gravity at 25°C:

1.01-1.1

Recommended 

Working Concentration:

0.1-0.5%

PH (1% aqua solution):

6-9

Storage Temperature (°C): 

0 - 35

Shelf Life:

2 years

1

Temperature torerant and Salt Resistant

2

Productivity over 65000mt annual.

3

Non corrosive of suggested dosage, economical and effective at low levels.

4

Can eliminate the use of alum & further ferric salts when used as primary coagulants.

5

Reduction in sludge of dewatering process system.

6

10 years manufacturing experience, with more than 20 technical engineers 

1

Dissolving 
concentration:

Polyacrylamdie (polyelectrolyte/flocculant) should be standardly be dissolved to 0.1-0.5% concentration.

2

Dissolving 
time:

The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. Incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant. 

3

Agitation 
speed: 

The ideal revolution of the agitator is between 200-400rpm. A high speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.

4

Application 
and Dosage:

The dosage range of varies from 1 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage.

5

Jar Test: 

Put sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the flocs properly at this time and note the sedimentation and clarity of top solution.

Bluwat Company Profile
 
Bluwat is a leading and TOP 5 Polyacrylamide manufactory in China, we produce Anionic PAM, Cationic PAM and Nonionic PAM, with annuel capacity about 60000tons, and export over 30000 tons to more than 50 countries every year

Blufloc APAM Package and Storage:

• Packed in Kraft or PE bags with inner plastic bags, with each bag containing 25kgs, or 750kgs net big bag.
• Stored in original packaging in cool and dry place, away from sources of heat, flame and direct sunlight.