Color Removal Chemicals Decolorant for Paper Wastewater Water Treatment Coagulant
Specifications:
Appearance: |
Colorless and Translucid Liquid |
Solid Content: |
50%min |
Viscosity: |
50-300(25°C, cps) |
PH Value : |
2.5-5(30% Water Solution) |
Specific Gravity: |
1.1-1.3 (at 20°C) |
Storage Temperature: |
10-35°C |
Description:
Application Fields:
Competitive Advantage:
1 |
Very suitable for treating high-colored wastewater from textile dyeing mills, pigment mills, printing ink, and paper mils. |
2 |
As flocculant to de-color high-colority effluent from dyestuffs processing plants. |
3 |
Strong decolorization and removal of COD. |
4 |
The quality is very stable, will not change to be a layered when temperature change. |
5 |
Faster sedimentation, better flocculation. |
6 |
Non-pollution (no aluminum, chlorine, heavy metal ions etc.). |
7 |
Less sludge produced than other inorganic coagulants. |
Application Methods:
1 |
To prepare effluent sample first |
2 | Before use, prepare color removal chemical solution of 2-2.5% concentration. |
3 |
Make PAC solution with 2-5% Al2O3 content. |
4 |
Make a solution of Anionic polymer with 0.1% concentration. |
5 |
It is very important, to adjust the effluent pH value to 8-10, higher or lower pH, color removal chemical works not well. |
6 |
Add PAC solution, mix with effluent completely. about 1-3 minutes |
7 |
Add color removal chemical solution, mix with effluent completely, about 5-10 minutes |
8 |
Add 1-2ppm anionic polymer, mix slowly to have big floc, settling. |
9 |
Check color for treated effluent |
10 |
Adjust dosage of BWD-01 and PAC to do more test to have a better testing result. |
Package and Storage:
Bluwat BWD Plant Snapshot: