Polyacrylamide Emulsion Coagulant And Flocculant Cationic Emulsion Coagulant Water Treatment

Jar Test:

Put sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the floc properly at this time and note the sedimentation and clarity of top solution.

Procedure and precautions upon dispersion and dissolving flocculants:
Dissolving time:

The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. Incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant.

Agitation speed:

The ideal revolution of the agitator is between 200-400rpm. A high speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant.

Dissolving concentration:

Should be standardly be dissolved to 0.1-0.2% concentration.

Handling measures and precautions:
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

• Easily soluble in water; dissolves rapidly.

• Non corrosive of suggested dosage, economical and effective at low levels.

• Can eliminate the use of alum & further ferric salts when used as primary coagulants.

• Faster sedimentation, better flocculation.

• Non-pollution (no aluminum, chlorine, heavy metal ions etc.).

• 10 years manufacturing experience, with more than 20 technical engineers

• BWD-01 Water Decoloring Agent , for color removal for textile dyeing wastewater treatment and for other wastewater .
• Poly Aluminium Chloride(PAC) , for drinking water treatment for wastewater treatment.
• Polyacrylamide (PAM)/Polyelectrolyte , for water treatment, for suldge treatment.
• PHPA(Partially Hydrolyzed Polyacrylamide) For Drilling , for drilling mud additive in the oilfield.
• Ferric Sulphate , for drinking water and wastewater treatment.
• PolyDADMAC , for water treatment and for paper mills and for cosmetics.
• Polyamine, for drinking and wastewater treatment, sludge dewatering, paper making and oilfield.
• Aluminum Chlorohydrate(ACH) liquid & powder, for drinking water treatment and other fields.