|Name:||Anionic Polyacrylamide||Molecular Weight:||12-15Million|
|Charge Degree:||20-30%||Applications:||Sludge Dewatering, Water Treatment , Wastewater Treatment|
|Capacity:||2000t/m||Usage:||Water Treatment Chemicals,Paper Chemicals,Coating Auxiliary Agents,Textile Auxiliary Agents,Plastic Auxiliary Agents|
|Cas No.:||9003-05-8,25085-02-3,C3H5ON||Other Names:||PAM,C3H5ON,anionic Polyacrylamide,Cationic Polyacrylamide/Polyelectrolyte/Flocculant,Flocculant / PAM|
|Solid Content:||≥ 90%||Color:||White Granular Powder|
sludge dewatering anionic polyacrylamide,
bluwat anionic polyacrylamide,
bluwat anionic pam
Anionic Polyacrylamide Used In Anoxic Oxic AO Method Sludge Dewatering
Blufloc Anionic Polyacrylamide, is solid powder water-soluble polymer with varying molecular weight and charge density. It is most often used to increase the viscosity of water (creating a thicker solution) or to encourage flocculation of particles present in water and allow rapid settlement of finely suspended solids.
It is a synthetic chemical that can be tailored to fit a broad range of applications.
Bluwat Chemicals manufactures and supplies specialty water treatment chemicals for oilfield, wastewater treatment, potable water, mineral processing, sugar and paper industries. The Blufloc range of anionic, cationic and non-ionic flocculants and coagulants are produced in China, our company's headquarters is in Yixing.
In addition to our complete range of powder grade polyacrylamides, marketed under the Blufloc trade name, our company also supplies polydadmacs (in both powder and liquid form) and polyamine liquid coagulants to cater for all requirements of the industries that we serve. Liquid dispersion polymers will be manufactured in Yixing.
|Products:||Molecular Weight:||Anionic Degree:|
Copolymer of acrylamide and
|AA5415||Medium High||Medium Low|
|AA5315||Medium High||Medium Low|
|AA5412||Medium Low||Medium Low|
|For Oil||HAA5412||Medium Low||Medium Low|
|HAA6520||Ultra High||Medium High|
|Bulk Density:||About 0.6-0.8|
|Shelf Life:||2 years
Applications for our products are found in many industries including
• Raw Water Treatment
- Flocculation, Clarification
- Dewatering of Lime Alum Sludge and Recovery of Water
• Industrial Waste Water Treatment
- Primary Clarification
- Secondary & Tertiary Treatment
- Sludge Thickening & Dewatering
- Color Removal
- Dissolved Air Floatation
• Sewage Treatment
- Primary Treatment
- Sludge Thickening & Dewatering
• Process Industries
- Sugar and Juice Industry: Clarification
- Paper Making: Retention, Wet Strengthening Agent, Resident Agent &
- Sugar Manufacturing: Mud Settling
- Chlor-alkali: Brine Clarification
- Thermal Power: Clarification of Scrubber Water
- Mining & Metallurgy: Tailings Thickening and Water Recovery
- Coal: Tailings Thickening and Water Recovery
- Constructions: Solid and Road Stabilization, Concrete Making
• Petroleum and Gas Field:
-Drilling fluids, EOR, Profile Modification, Fluid loss control, Lubrication,
How To Use The Blufloc Polyacrylamide?
Application and Dosage:
The dosage range of varies from 0.2 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage.
Put sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the floc properly at this time and note the sedimentation and clarity of top solution.
Contact Person: Mr. Eric Min