Water Treatment Polyelectrolyte Flocculant Plant Chemicals Water Soluable Wastewater

Anionic Polyacrylamide / Polyelectrolyte
/ Flocculant /

Packed in 25kg kraft bag or white PE bag on
pallet and
18-20ton/FCL, or 750kgs big bag

Water treatment, paper making, sludge dewatering,
textile,
sugar and juice, drilling, oil & gas, and mining.

Coal Mine
Washing

Coal washing tailing centrifugal separation
Sedimentation and filtration of coal powder and coal mud.
Highly improve the recovery rate of coal powder and the filtration speed.

Sewage Water
Treatment

Nonionic-polyacrylamide for acidophilic water systems.
If matched with PAC, aluminum sulfate, the effect will be excellent.

Metallurgical
Mineral Dressing

Textile Sizing, as a kind of composition for chemical grout, starch textiles
Highly improve the adhesive property, penetrability, and desizing performance, enable the textile to have electrostatic prevention performance, reduces the desizing rate, and reduces the starch mixing spots, cloth machine breaking efficiency, and falling objects.

Used as a fixing agent, residency agent, filtration aid, and paper dry and wet intensity reinforcing agent in the paper-making industry.

Sand Prevention
Solidification

Dissolved into 0.3% concentration and cross-linking agent added.
It can be sprayed on deserts to prevent and solidify sand.

Oil field profile controlling and water-plugging agent, matched with lignocellulose, and a certain amount of chemical adhesive were added.
It can be used as an oil field profile controlling and water-plugging agent.

Well Drilling
Mud Additives

In the oil fields, as a kind of mud additive.
To increase the viscosity of water and improve the effectiveness of the water flooding process.

Advantages of Blufloc Polyacrylamide:

• Economical to use - lower dosage levels.

• Easily soluble in water; dissolves rapidly.

• Noncorrosive of suggested dosage, economical, and effective at low levels.

• Can eliminate the use of alum & further ferric salts when used as primary coagulants.

• Reduction in the sludge of the dewatering process system.

• Faster sedimentation, better flocculation.

• Non-pollution (no aluminum, chlorine, heavy metal ions, etc.).

• 10 years of manufacturing experience, with more than 20 technical engineers

Application and Dosage:
The dosage range varies from 0.2 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage.
Jar Test:
Put a sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the floc properly at this time and note the sedimentation and clarity of the top solution.
Procedure and precautions upon dispersion and dissolving flocculants:
Dissolving time: The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature, and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. An incomplete mixture of flocculants or lumping may inhibit the performance of the flocculant.
Agitation speed: The ideal revolution of the agitator is between 200-400rpm. A high-speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.
Dissolving concentration: Flocculants should be standardly dissolved to 0.1-0.5% concentration. It is also effective to start dissolving at a slightly higher concentration and then dilute the flocculant mixture immediately before use.
Handling measures and precautions:
Proper human safety products such as Splash goggles, lab coats, vapor respirators, gloves, and boots should be worn while handling and applying chemicals. Splashes on the skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer to MSDS for more details.

• Flocculation Mechanism:

Adsorbing suspension particles, polymer chains entangle and cross-link each other to form bridging and make flocculation structure enlarge and thicken, and has the functions of surface adsorption and electric neutralization.

• Reinforcing Mechanism:

PAM molecule chain and dispersed phase form bridging bonds, ion bonds, and covalent bonds to increase combination strength.