Medium Molecular Weight and Low Charge Polyelectrolyte Flocculant ECO - friendly Water Purifying Chemicals

Appearance:

Off-White Granular Powder

Ionic Charge:

Anionic

Particle Size:

20-100 mesh

Molecular Weight:

Low to Medium

Hydrolysis Degree:

Medium

Solid Content:

89% Min

Approximate Brookfield viscosity at 25° C:

@ 1.0%

>800

@ 0.50%

>400

@ 0.25%

>150

Bulk Density:

About 0.6-0.8

Specific Gravity at 25°C:

1.01-1.1

Recommended 

Working Concentration:

0.1-0.5%

PH (1% aqua solution):

6-9

Storage Temperature (°C): 

0 - 35

Shelf Life:

2 years

1

Raw water 

treatment

2

Sewage Water 

Treatment

Used for acidophilic water systems. If matched with PAC, aluminum sulphate,

the effect will be excellent.

3

Industrial 

Wastewater 

Treatment

Dosing polyacrylamide can reduce the consumption of coagulant and speed up 

sedimentation.

4

Coal Mine

Washing

Coal washing tailing centrifugal separation
Sedimentation and filtration of coal powder and coal mud.
Highly improve the recovery rate of coal powder and the filtration speed.

5

Paper-making

Used as a fixing agent, residency agent, filtration aid, and paper dry and wet

intensity reinforcing agent in the paper-making industry.

6

Sand Prevention 

Solidification

Dissolved into 0.3% concentration and cross-linking agent added. It can be sprayed on desert to prevent and solidify sand.

7

Sugar and 

juice mills

For sugar and juice flocculation, sedimentation, clarification, and floatation

8

Textile

Textile Sizing, as a kind of composition for chemical grout, starch textiles

Highly improve the adhesive property, penetrability, and desizing performance, enable the textile to have electrostatic prevention performance, reduces the desizing rate, and reduces the starch mixing spots, cloth machine breaking efficiency, and falling objects.

1

Economical to use - lower dosage levels.

2

Easily soluble in water; dissolves rapidly.

4

10 years of manufacturing experience, with more than 20 technical engineers

1

Dissolving 

concentration:

Polyelectrolyte/flocculant AA3512 should be standardly dissolved to 0.1-0.5% concentration.

2

Dissolving 

time:

The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature, and agitation. However, most flocculants generally require lower than 1 hour of agitation to completely dissolve the powder. An incomplete mixture of flocculants or lumping may inhibit the performance of the flocculant. 

3

Agitation 

speed: 

The ideal revolution of the agitator is between 200-400rpm. A high-speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.

4

Application 

and Dosage:

The dosage range varies from 1 - 3.0 ppm depending upon the type of effluent and application. You are advised to do jar tests for evaluating the functioning and approximate dosage.