Anionic Polyacrylamide Emulsion Medium Molecular Weight Polymer , CAS No. 9003-05-8
Specific Gravity at 25°C:
PH (1% aqua solution):
Storage Temperature (°C):
0 - 35
|As flocculants for raw water sedimentation, thickening and suspending removal|
Used for acidophilic water systems. If matched with PAC, aluminum sulphate,
Dosing polyacrylamide can reduce the consumption of coagulant and speed up
Coal washing tailing centrifugal separation
Used as fixing agent, residency agent, filtration aid and paper dry and wet
Oil field profile controlling and water- plugging agent, matched with lignocellulose
In oil field, as a kind of mud additives.
It can preserve water and solidify sand for soil and can play a role of humectant on slope grass planting, tree planting, and sand solidification and dust prevention of soil.
Textile Sizing, as a kind of composition for chemical grout, starch textiles
Economical to use - lower dosage levels.
Can be used directly, dont need to mix.
Non corrosive of suggested dosage, economical and effective at low levels.
Can eliminate the use of alum & further ferric salts when used as primary coagulants.
Reduction in sludge of dewatering process system.
Faster sedimentation, better flocculation.
Non-pollution (no aluminum, chlorine, heavy metal ions etc.).
10 years manufacturing experience, with more than 20 technical engineers
The dosage range of varies from 1 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage.
Put sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the flocs properly at this time and note the sedimentation and clarity of top solution.
Package and Storage:
Packed in 25kg plastic drums, or 1000kg IBC drums
Stored in original packaging in cool and dry place, away from sources of heat, flame and direct sunlight.
Anionic Polyacrylamide Emulsion Picture: