Polyacrylamide Emulsion Blufloc EA 6518 Flocculant for Color Removal
Anionic Polyacrylamide Emulsion Medium Molecular Weight Polymer , CAS No. 9003-05-8 EA-6518 Grade for Color Removal
Specific Gravity at 25°C:
PH (1% aqua solution):
Storage Temperature (°C):
0 - 35
|As flocculants for raw water sedimentation, thickening and suspending removal|
Used for acidophilic water systems. If matched with PAC, aluminum sulphate,
Dosing polyacrylamide can reduce the consumption of coagulant and speed up
Coal washing tailing centrifugal separation
Used as fixing agent, residency agent, filtration aid and paper dry and wet
Textile Sizing, as a kind of composition for chemical grout, starch textiles
Can be used directly, don't need to mix.
Economical to use - lower dosage levels.
Non-corrosive of suggested dosage, economical and effective at low levels.
Can eliminate the use of alum & further ferric salts when used as primary coagulants.
Reduction in the sludge of the dewatering process system.
Faster sedimentation, better flocculation.
Non-pollution (no aluminum, chlorine, heavy metal ions etc.).
10 years of manufacturing experience, with more than 20 technical engineers
The dosage range varies from 1 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage.
Put a sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the flocs properly at this time and note the sedimentation and clarity of top solution.
Package and Storage:
Packed in 25kg plastic drums, or 1000kg IBC drums
Stored in original packaging in cool and dry place, away from sources of heat, flame and direct sunlight.
Anionic Polyacrylamide Emulsion Picture: