|
Product Details:
|
| Brand Name: | Bluwat Blu AM Series | Chemical Compound: | Cationic Quaternary Ammonium Salt |
|---|---|---|---|
| Application: | Mining Water Treatment | Appearance: | Liquid Light Yellow |
| Active Content: | 100% | Solid Content: | 50%Min |
| Manufacturer: | Yixing Bluwat Chemicals | ||
| High Light: | quaternary ammonium compounds,water treatment coagulant |
||
Blufloc Cationic Coagulant Aid Quaternary Ammonium Poymer for Mining Application
Description
Specifications
| Product Name: | Cationic Polyelectrolyte Quaternary Ammonium Polymer |
|
Appearance: |
Clear, Colorless to Light Yellow, Transparent Colloid |
|
Charge Density: |
Very High |
|
Relative Molecular Weight: |
High |
|
Solid Content: |
>0% |
|
Specific Gravity at 20°C: |
1.10-1.15 |
|
PH Value (1% Solution): |
5-7 |
|
Viscosity: |
500-2000(@25°C,cps) |
|
Storage Temperature: |
Room temperature |
Application Fields
Competitive Advantage
|
1 |
Easy to use. |
|
2 |
Can be used alone or in combination with inorganic coagulants, such as Poly Aluminum Chloride. |
|
3 |
Can be used to treat color wastewater from textile, dyestuff, and paper industry. |
|
4 |
Used as retention agent in the paper & pulp processing |
|
5 |
Faster sedimentation, better flocculation. |
|
6 |
Non-pollution (no aluminum, chlorine, heavy metal ions etc.). Non corrosive of suggested dosage, economical and effective at low levels. |
|
7 |
Can eliminate the use of alum & further ferric salts when used as primary coagulants. |
|
8 |
Less sludge produced than other inorganic coagulants. |
Application Methods
|
1 |
The product can be in any concentration of soluble in water, it is recommended to use when the product with water will be diluted 10 times, add in system. |
| 2 | The product should avoid all kinds of pollution, including tank, pump, pollution caused by pipe system, etc. |
|
3 |
Product application effect and join point depends on the following factors: types of sewage, piping layout, adding other additives, PH and other operating conditions. Used for water purification, addition amount of 5 ~ 50 PPM. |
| 4 | Should try to keep the system stable in operation, the operation in the best condition. |
Bluwat Quaternary Ammonium Cationic Polymer Plant Snapshot:
Bluwat Main Products:
Contact Person: Mr. Eric Min
Tel: +8613861499902
