Anionic Polyacrylamide emulsion Drilling Mud Additives Blufloc PHPA Emulsion Blufloc EA6520

1. It has good water-loss controlling ability, especially PAC is highly effective drop filter-loss agent. Even added at low viscosity, it can control water loss at very high level, but dose not effect lurry's other characteristics.
2. It can form figh quality slurry cake which is strong and flexible.
3. It has good temperature resistance and superior anti-salt character. Under certain salt density. It can remain good-water-loss and certain rheology, so the viscosity in salt solution is the same as in water. which is specially suitable for sea misering and deep well.
4. It effectively controls the rheology of slurry , with good on-Newtonian fluid performance.

Oil-displacing Agent of Oil Field Tertiary Oil Recovery:

It can adjust the rheology of filled water, increase the viscosity of driving liquid, improve water drive wave and efficiency, lower water phase permeability in ground layer, and enable water and oil to flow forward at even speed. Its effect is that it is mainly used in tertiary oil recovery of oil fields in the aspect oil production, and raw oil of about 100 to 150ton more can be produced through filling the macromolecule polyacrylamide product one ton.

Well Drilling Mud Raw Materials:

In oil field exploration and development and exploration of geology, water and coal, it is used as adhesive of well drilling mud raw materials, can improve the service life of drill bits, improve the drill speed and drilling footage, and reduce plug in replacing drill, and has prominent well slough preventing effect, and it can be used as fracturing fluid of oil fields or plugging agent of controlling profile and plugging water.

Flocculant:

The polarity gene adsorbs the solid particles dispersed in water, bridges between the particles and formats the large aggregates, sedimentation and separates of water, flocculates detritus and clay in drilling fluid

Dispersant:

In the drilling mud treatment, this product can improve the lubricity and stability of the mud to reduce the water loss, prevent sticking effectively, increase drilling efficiency.

Blocking Agent:
The product can generate cross linking under the effect of Al3+, Fe 3+, Ca2+ and other ions, a part of high molecular compound is changed from linear shape into body shapes. The product is not watersoluble, and can be adsorbed on the borehole to block ground layer gaps and topreven the leakage of drilling fluid.

Lubricant:
The product can be absorbed on the surface of metal or clay particles to form liquid film to change friction on the solid surface into liquid frication, thereby lubricating drill bits and drills, lowering the mud cake frication coefficient, and reducing underground accidents.

Fluid Loss Additive:

The hydrolysis degree is higher, the hydration group on the molecular chain is more, the hydration is better, and it changes from flocculant into fluid loss additive. Drilling mud should be treated to keep cake’s permeability as low as possible in order to maintain a stable borehole and to minimize filtrate invasion, and damage to the pay zone.

Shale Inhibition Agent:

The multipoint adsorption of polymer formats to the crisscross membrane macromolecules, plays a role of enhancing the stability of borehole .

1. 25L, 200L, 1000L drums
2. Should be stored in original packaging in cool and dry place, away from sources of heat, flame and direct sunlight.
3. Shelf life: 12months.