Blufloc Polyacrylamide:

Blufloc Nonionic Polyacrylamide Specifications:

1. Blufloc Polyacrylamide (PAM) / Polyelectrolyte is a water-soluble polymer with Anionic, Cationic, and Nonionic types.
2. The range of molecular weight is different, Anionic is from 5-22 million, Cationic is from 5-12 million and Nonionic is from 5-12 million, with a charge density ranging from 0-60%.
3. It is most often used to increase the viscosity of water (creating a thicker solution) or to encourage the flocculation of particles present in water.
4. Due to the polar groups on the molecular chain containing a certain amount, it can through the adsorption of solid particles suspended in water, bridging between particles or through the charge and make the particle formation of large flocs condensation. So, it can accelerate the settlement of particles in suspension, and have obvious to speed up the solution to clarify, promote filtering, and other effects.
5. Mainly used for various industrial wastewater flocculation sedimentation, sedimentation, and clarification treatment, such as iron and steel plant wastewater, electroplating wastewater, wastewater metallurgy, coal washing wastewater treatment, and sludge dewatering. Can also be used to clarify and drinking water purification treatment, and sugar & juice mills.
6. Soluble in water, safe, non-toxic, hydrolytic stable, is not sensitive to the change of pH value, anti-chlorine. Harmless, non-flammable, and non-explosive, it can be stored at room temperature, and it cannot be placed in the sun. It is slightly acidic, when skin contact, wash immediately with plenty of water.

Coal Mine

Washing

Coal washing tailing centrifugal separation

Sedimentation and filtration of coal powder and coal mud.

Highly improve the recovery rate of coal powder and the filtration speed.

Sewage Water

Treatment

Nonionic-polyacrylamide for acidophilic water systems.

If matched with PAC, aluminum sulfate, the effect will be excellent.

Metallurgical

Mineral Dressing

Textile Sizing, as a kind of composition for chemical grout, starch textiles

Highly improve the adhesive property, penetrability, and desizing performance,

enable the textile to have electrostatic prevention performance, reduces the desizing rate, and reduces the starch mixing spots, cloth machine breaking

efficiency, and falling objects.

Used as a fixing agent, residency agent, filtration aid, and paper dry and wet

intensity reinforcing agent in the paper-making industry.

Sand Prevention

Solidification

Dissolved into 0.3% concentration and cross-linking agent added.

It can be sprayed on the desert to prevent and solidify sand.

Oil field profile controlling and water-plugging agent, matched with lignocellulose

and a certain amount of chemical adhesive added.

It can be used as an oil field profile controlling and water-plugging agent.

Well Drilling

Mud Additives

In the oil fields, as a kind of mud additive.

To increase the viscosity of water and improve the effectiveness of the water

flooding process.

• Economical to use - lower dosage levels.

• Easily soluble in water; dissolves rapidly.

• Noncorrosive of suggested dosage, economical, and effective at low levels.

• Can eliminate the use of alum & further ferric salts when used as primary coagulants.

• Reduction in the sludge of the dewatering process system.

• Faster sedimentation, better flocculation.

• Non-pollution (no aluminum, chlorine, heavy metal ions, etc.).

• 10 years of manufacturing experience, with more than 20 technical engineers

Application and Dosage:
The dosage range of varies from 0.2 - 3.0 ppm depending upon the type of effluent and application. It is always advised to do a jar test for evaluating the functioning and approximate dosage.

Jar Test:

Put a sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm, and then slowly agitate at 60rpm. Determine the floc properly at this time and note the sedimentation and clarity of the top solution.

Procedure and precautions upon dispersion and dissolving flocculants:
Dissolving time: The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature, and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. An incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant.

Agitation speed: The ideal revolution of the agitator is between 200-400rpm. A high-speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.

Dissolving concentration: Flocculants should be standardly dissolved to 0.1-0.2% concentration. It is also effective to start dissolving at a slightly higher concentration and then dilute the flocculant mixture immediately before use.

Handling measures and precautions:
Proper human safety products such as Splash goggles, lab coats, vapor respirators, gloves, and boots should be worn while handling and applying chemicals. Splashes on the skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer to MSDS for more details.

Main Products:

• BWD-01 Water Decoloring Agent, for color removal for textile dyeing wastewater treatment and for other wastewater.
• Poly Aluminium Chloride(PAC), for drinking water treatment for wastewater treatment.
• Polyacrylamide (PAM)/Polyelectrolyte, for water treatment, for sludge treatment.
• PHPA(Partially Hydrolyzed Polyacrylamide) For drilling mud additive in the oilfield.
• Ferric Sulphate, for drinking water and wastewater treatment.
• PolyDADMAC, for water treatment and for paper mills, and cosmetics.
• Polyamine, for drinking and wastewater treatment, sludge dewatering, paper making, and oilfield.
• Aluminum Chlorohydrate(ACH) liquid & powder, for drinking water treatment and other fields.

FAQ:

A:

We can provide a certain quantity of free samples.

Give us your FedEx account to arrange a sample.

Place order to FedEx.

A:

Give us your exact quantity, packing, destination port, or specs requirements to quote the price.

A:

The best way to request a sample to test is after confirmation, you can place a trial order.

A:

No problem, we would like to grow up together.

A:

We can provide application methods to you.

A:

We discuss to be an agent after some orders and trust.

A:

Yes, we have provided OEM service to lots of big and famous companies in the order.

A:

500kgs of MOQ.

A:

More than 50000tons annual per year.

A:

Quality is the life of our company, in the past 15 years, quality brings us benefits and give us vitality.

We can ensure quality consistency.

If you still don't trust us, you can request a third part company, such as SGS, to inspect and test the bulk cargo before shipment(you should bear the inspection expense).