Appearance:

Colorless and Translucid Liquid

Solid Content:     

50%min

 Viscosity(25°C, cps):

50-300

PH Value (30% Water Solution):

3-6

Specific Gravity (at 20°C):

1.1-1.3 

Water Solubility:

Completely Soluble With Water at Any Rate

Package:

30kgs net plastic drum, 250kgs net plastic drum palletized, 1250kgs net IBC drum

Storage Temperature:

Room temperature 

1

High performance to remove textile wastewater color.

2

Used to de-color high-coloring effluent from dyestuffs plants.

3

Stronger decolorization (50%~99%) and removal of COD (50%~80%).

4

Used to treat effluent from the textile and dyeing industry, pigment industry, printing ink industry, and paper industry.

5

Can be used as a retention agent in paper & pulp processing

6

Faster sedimentation, better flocculation.

7

Non-pollution (no aluminum, chlorine, heavy metal ions, etc.).

8

It can be used before or after biological treatment.

9

Less sludge is produced than other inorganic coagulants.

1

Make BWD-01 solution, and mix with 40 times water to have 2.5% solution for use.

2

Make PAC solution, 2-5% Al2O3

3

Make a solution of Anionic Polyelectrolyte, 0.1%.

4

Prepare the affluent, test pH value, and adjust pH value to 8-9. (It is very important, higher or lower pH, BWD-01 works not well)

5

Add PAC solution, and mix with effluent completely. about 1-3 minutes

6

Add BWD-01 solution, and mix with effluent completely, about 5-10 minutes

7

Add a small content of anionic polyelectrolyte solution, and mix slowly to have a big floc. (This step is a suggestion)

8

Sedimentation

9

Check the color of treated effluent

10

Adjust the dosage of BWD-01 and PAC to do more tests to have better testing results.