55295-98-2 Water Decoloring Agent For Chemical Wastewater Treatment
|Experiment Process||Chemical Reagents||Dosage(g/T wastewater)|
|Step 1||Water Decoloring Agent||20000|
Colorless and Translucid Liquid
PH Value (30% Water Solution):
Specific Gravity (at 20°C):
Completely Soluble With Water at Any Rate
30kgs net plastic drum, 250kgs net plastic drum palletized, 1250kgs net IBC drum
High performance to remove textile wastewater color.
Used to de-color high-colority effluent from dyestuffs plants.
Stronger decolorization (50%~99%) and removal of COD (50%~80%).
Used to treat effluent from textile and dyeing industry, pigment industry, printing ink industry, and paper industry.
Can ben used as a retention agent in the paper & pulp processing
Faster sedimentation, better flocculation.
Non-pollution (no aluminum, chlorine, heavy metal ions, etc.).
It can be used before or after biological treatment.
Less sludge produced than other inorganic coagulants.
Make BWD-01 solution, mix with 40 times water to have a 2.5% solution for use.
Make PAC solution, 2-5% Al2O3
Make a solution of Anionic Polyelectrolyte, 0.1%.
Prepare the effluent, test pH value, adjust pH value to 8-9. (It is very important, higher or lower pH, BWD-01 works not well)
Add PAC solution, mix with effluent completely. about 1-3 minutes
Add BWD-01 solution, mix with effluent completely, about 5-10 minutes
Add small content of anionic polyelectrolyte solution, mix slowly to have big floc. (this step is a suggestion)
Check color for treated effluent
Adjust the dosage of BWD-01 and PAC to do more tests to have a better testing results.
Package and Storage:
keywords: textile waste water treatment, sewage treatment water, chemical used for purification of water