Textile Industry Usage Water Decoloring Agent High Efficient Color Removal Chemical
Description:
Specifications:
Appearance: |
Colorless and Translucid Liquid |
Solid Content: |
50%minimun |
Specific Gravity at 20°C: |
1.1-1.3 |
PH Value (30% Solution): |
3-6 |
Viscosity(25°C): |
50-300cps |
Solubility: |
Completely Soluble With Water at Any Rate |
Package: |
30kgs net plastic drum, 250kgs net plastic drum palletized, 1250kgs net IBC drum |
Storage Temperature: |
Room temperature(10-35℃) |
BWD-01 Water Decoloring Agent :
Product Name: | BWD-01 Water Decoloring Agent | Component: | Dicyandiamide-formaldehyde Resin |
Solid Content: | 50%min | CAS No.: | 55295-98-2 |
Brand: | Bluwat | Other Name: | Color Removal Chemical; Decolorant; Decolorization Chemical; Dicyandiamide-formaldehyde Resin Flocculant |
Application: | Waste Water Color Treatment | Decolorization: | 50~99% |
Sample: | Free to Test | Certificates: | ISO, SGS |
Application Fields:
Competitive Advantage:
1 | Strong decolorization ( 80%~99%) and removal of COD ( 50%~80%) |
2 | In textile effluent treatment, compare to the ferrous sulphate and lime, low dosage and sludge. |
3 | Faster sedimentation, better flocculation in treating. |
4 | Non-toxic, environmentally friendlly, non corrosive of suggested dosage, economical. |
5 | Can eliminate the use of alum & further ferric salts when used as primary coagulants. |
Application case:
A. When have biological treatment first and after they make chemical treatment. | B. When the treat first by chemicals, then the usual dosages are: |
1. | Test and adjustment the pH of the effluent to 8-9 |
2. | First we apply the PAC (contact time 3-5 min with the waste water), after then BWD-01 Water Decoloring Agent (contact time 5-10 min), and after then anionic polyacrylamide. |
3. | It will give too much economy if we'll adjust the pH 8-9, otherwise the consumption of BWD-01 will be ~20% higher. |
Dosage: | |
50-80 ppm BWD-01(raw) | 80-100 ppm BWD-01(raw) |
15-20ppm Polyaluminum Chloride(solid) | 15 -30 ppm PAC(solid) |
1 - 2 ppm Anionic polyacrylamide(solid) | 1 - 2 ppm Anionic polyacrylamide(solid) |
Bluwat Quaternary Ammonium Polymer Plant Snapshot: