Anionic Polyacrylamide Homopolymer Flocculant Off - White Granular Powder

Appearance:

Off-White Granular Powder

Ionic Charge:

Anionic

Particle Size:

20-100 mesh

Molecular Weight:

Medium

Hydrolysis Degree:

Medium

Solid Content:

89% Min

Approximate Brookfield viscosity at 25° C:

@ 1.0%

>1500

@ 0.50%

>600

@ 0.25%

>300

Bulk Density:

About 0.6-0.8

Specific Gravity at 25°C:

1.01-1.1

Recommended 

Working Concentration:

0.1-0.5%

PH (1% aqua solution):

6-9

Storage Temperature (°C): 

0 - 35

Shelf Life:

2 years

1

Raw water 

treatment

2

Sewage Water 

Treatment

Used for acidophilic water systems. If matched with PAC, aluminum sulphate,

the effect will be excellent. water purification chemicals, sewage water treatment

3

Industrial 

Wastewater 

Treatment

Dosing polyacrylamide can reduce the consumption of coagulant and speed up 

sedimentation.

4

Coal Mine

Washing

Coal washing tailing centrifugal separation
Sedimentation and filtration of coal powder and coal mud.
Highly improve the recovery rate of coal powder and the filtration speed.

5

Paper-making

Used as fixing agent, residency agent, filtration aid and paper dry and wet

intensity reinforcing agent in paper-making industry.

6

Well Drilling 

Mud Additives

In oil field, as a kind of mud additives.

To increase the viscosity of water and improve the effectiveness of the water flooding 

process.

7

Sugar and 

juice mills

For sugar and juice flocculation, sedimentation, clarification and floatation

8

Textile

Textile Sizing, as a kind of composition for chemical grout, starch textiles

Highly improve the adhesive property, penetrability and desizing performance, enable the textile to have electrostatic prevention performance, reduces the desizing rate, and reduces the starch mixing spots, cloth machine breaking efficiency, and falling objects.

2

Economical to use - lower dosage levels.

4

Easily soluble in water; dissolves rapidly.

5

Non corrosive of suggested dosage, economical and effective at low levels.

6

10 years manufacturing experience, with more than 20 technical engineers

1

Flocculation Mechanism:

Adsorbing suspension particles, polymer chains entangle and cross-link each other to form bridging, and make flocculation structure enlarge and thicken, and has the functions of surface adsorption and electric neutralization.

2

Reinforcing Mechanism:

PAM molecule chain and dispersed phase form bridging bond, ion bond and covalent bond to increase combination strength.

1

Dissolving 

concentration:

Polyacrylamdie (polyelectrolyte/flocculant) should be standardly be dissolved to 0.1-0.5% concentration.

2

Dissolving 

time:

The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. Incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant. 

3

Agitation 

speed: 

The ideal revolution of the agitator is between 200-400rpm. A high speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.

4

Application 

and Dosage:

The dosage range of varies from 1 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage.

5

Jar Test: 

Put sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the flocs properly at this time and note the sedimentation and clarity of top solution.