|
Product Details:
|
| Product Name: | Poly Ferric Sulphate | Chemical Compound: | Coagulant Polymer |
|---|---|---|---|
| Application: | Dyeing Wastewater Treatment | Package: | 25kgs Plasic Bag |
| Fe3+ Content: | 19%min | Manufacturer: | Yixing Bluwat Chemicals |
| Loading Port: | Qingdao Port | Leading Time: | Within 10 Ddays |
| High Light: | ferrous sulfate,ferric sulphate coagulant |
||
Dye Wastewater Treatment of PFS Poly Ferric Sulphate Efficient Coagulant High Purity
Description:
Specifications:
| Total iron%: | ≥21% |
| Fe3+ Content (%): | 19 Min. |
| Reduced matter(as Fe2+)%: | ≤1.0% |
| Entire iron(mass fraction): | ≥20% |
| Basicity: | 8-16% |
| As %: | ≤0.0001 |
| Pb %: | ≤0.0006 |
| PH(1% water solution): | 2.0-3.0 |
| Insoluble Substances (%): | 1.0 Max. |
Application Fields:
Application Methods:
|
1 |
Preparation of PFS working solution: dissolve PFS in water at the concentration of 10-30% (W/W), stir until it is completely hydrolyzed. Dilute the result red brown liquid to required concentration, usually 2-5% for tap water and 5-10% for industrial waste water. |
|
2 |
Dosage: Dosage can be determined according to the formation and settling of flocs by sample test. For treatment of tap water under identical condition, the dosage of SPFS is equivalent to polyaluminum chloride, or 1/3-1/4 of that of aluminum Sulphate. |
|
3 |
Pump calculated amount of the above SPFS working solution into gauge tank, and add into the raw water to be treated. |
|
4 |
Generally the PFS working solution shall be used right after preparation. Use pure tap water for preparation. Sometimes slight precipitation may occur depending on the water used. |
|
5 |
Keep close attention to the progressof the application which may be divided into three stages: |
|
6 |
Compulsive filtration: choose suitable filter material or filter aid to achieve good capture effect and filtration speed. This is a key step for improvement of water quality. |
Competitive Advantage:
|
1 |
It can replace other inorganic flocculants comprehensively. Use for industries wastewater treatment of printing & dyeing, paper making, electroplating, circuit board, food processing, pharmacy, fertilizer, pesticide etc. |
|
2 |
It is suitable for phosphorus removal of life sewage wastewater treatment plant or improving the hydrophobicity of sludge. |
|
3 |
It can replace the use of aluminum salt. It can be used to remove the residual aluminium pollution of tap water during its treatment. |
|
4 |
Used to sludge press mud. It will have excellent effect with used with few of polyacrylamide. |
Package and Storage:
Bluwat Ferric Sulphate Plant Snapshot:
Bluwat Main Products:
Contact Person: Mr. Eric Min
Tel: +8613861499902
