Paper Wastewater Color Treatment Chemical Decoloring Agent Water Treatment
-
High Light
decolorizing agent
,cod chemicals
-
Brand NameBWD-01 Water Decoloring Agent
-
Chemical CompoundColor Removal Chemical
-
ApplicationPaper Wastewater Color Treatment
-
Active Content100%
-
Packing30kgs, 250kgs, 1250kgs Drums
-
Capacity3500t/m
-
SampleFree To Test
-
Place of OriginChina
-
Brand NameBLUWAT
-
CertificationISO9001, SGS, BV
-
Model NumberBWD-01
-
Minimum Order Quantity1000kgs
-
Pricenegotiable
-
Packaging Details30kgs, 50kgs, 250kgs, 1250kgs drums
-
Payment TermsWestern Union, L/C, T/T, D/P, D/A
-
Supply Ability1000tons/w
Paper Wastewater Color Treatment Chemical Decoloring Agent Water Treatment
Paper Wastewater Color Treatment Chemical Water Decoloring Agent
Description:
- The paper making wastewater always containing high COD, BOD, TSS and Color, if only use PAC or Polyacrylamide, just can remove the TSS, COD and part BOD, the color will be sill the problem, so, our BWD-01 Water Decoloring Agent is used to solve this problem, high efficient, low dosage, low sludge and cost.
- BWD-01 Water Decoloring Agent has high color removal of dye wastewater, by providing a large number of cations, the negative charge is brought on dye molecules are neutralized instability, at the same time with BWD-01 Water Decoloring Agent by a large number of hydrolysis of flocs. Can be adsorbed dye, destabilization of the snare, from water separation, so as to achieve the purpose of bleaching.
BWD-01 Water Decoloring Agent :
| Product Name: | BWD-01 Water Decoloring Agent | Component: | Dicyandiamide-formaldehyde Resin |
| Solid Content: | 50%min | CAS No.: | 55295-98-2 |
| Brand: | Bluwat | Other Name: | Color Removal Chemical; Decolorant; Decolorization Chemical; Dicyandiamide-formaldehyde Resin Flocculant |
| Application: | Waste Water Color Treatment | Decolorization: | 50~99% |
| Sample: | Free to Test | Certificates: | ISO, SGS |
BWD-01 Water Decoloring Agent Specifications:
| Items: | BWD-01 Water Decoloring Agent |
| Appearance: | Colorless or light-color sticky liquid |
| Dynamic viscosity (cps,20°C): | 50-250 M PA. S (20 °C ) |
| pH (30% water solution): | 1.0~3.0 |
| Solid content %: | ≥50 |
Application Fields:
- Mainly used for Color Removal and COD Reduction for wastewater from textile dyeing & printing mills, dyestuffs & pigment mills, ink & paper making mills.
- Suitable to treat wastewater with Reactive dye, Acid dye, Disperse dye, Direct dye, Sulphur dye, Vat dye etc..
- It can be used in the production process of Paper & Pulp as Retention Agent.
Competitive Advantage:
|
1 |
Strong decolorization ( 80%~99%) and removal of COD ( 50%~80%) |
| 2 | In textile effluent treatment, compared to the ferrous sulphate and lime, low dosage and sludge. |
|
3 |
Faster sedimentation, better flocculation in treating. |
|
4 |
Non-toxic, environmentally friendly, noncorrosive of suggested dosage, economical. |
|
5 |
Can eliminate the use of alum & further ferric salts when used as primary coagulants. |
Application case:
| A. When have biological treatment first and after they make chemical treatment. | B. When the treat first by chemicals, then the usual dosages are: |
| 1. | Test and adjust the pH of the effluent to 8-9 |
| 2. | First, we apply the PAC (contact time 3-5 min with the wastewater), after then BWD-01 Water Decoloring Agent (contact time 5-10 min), and after then anionic polyacrylamide. |
| 3. | It will give too much economy if we'll adjust the pH 8-9, otherwise, the consumption of BWD-01 will be ~20% higher. |
| Dosage: | |
| 50-80 ppm BWD-01(raw) | 80-100 ppm BWD-01(raw) |
| 15-20ppm Polyaluminum Chloride(solid) | 15 -30 ppm PAC(solid) |
| 1 - 2 ppm Anionic polyacrylamide(solid) | 1 - 2 ppm Anionic polyacrylamide(solid) |
Bluwat Quaternary Ammonium Polymer Plant Snapshot:
Main Products:
- BWD-01/03 Water Decoloring Agent, a special product for color removal for textile dyeing wastewater treatment and for other wastewater.
- Poly Aluminium Chloride, used for drinking water treatment for wastewater treatment.
- Polyacrylamide, flocculant for water treatment, for sludge treatment.
- PHPA(Partially Hydrolyzed Polyacrylamide) For Drilling, for drilling mud additive in the oilfield.
- Ferric Sulphate , for drinking water and wastewater treatment.
- PolyDADMAC, for water treatment and for paper mills and for cosmetics.
- Polyamine, for drinking and wastewater treatment, sludge dewatering, paper making and oilfield.
- Aluminum Chlorohydrate(ACH) liquid & powder, for drinking water treatment and other fields
Related Products
Our products are sold all over the world, you can rest assured.