logo
Yixing bluwat chemicals co.,ltd
products
products
Home > products > Chemical Demulsifier > Oilfield Demulsifier For Drilling Wastewater Demulsifying Agent Emulsion Breaker

Oilfield Demulsifier For Drilling Wastewater Demulsifying Agent Emulsion Breaker

Product Details

Place of Origin: China

Brand Name: Bluwat

Certification: ISO

Payment & Shipping Terms

Minimum Order Quantity: 1 Ton

Price: Negotiable

Packaging Details: 200 L plastic drums, 1000 L IBC tanks

Delivery Time: 5-10 working days

Payment Terms: L/C, D/A, D/P, T/T

Get Best Price
Highlight:

Oilfield Demulsifier

,

Drilling Wastewater Demulsifying Agent

,

Drilling Wastewater Emulsion Breaker

Appearance:
Yellow Liquid
Active Content:
>= 40 Percent
Product PH:
2 To 4
Recommended PH Of Use:
5 To 12, Best Near 9
Typical Dosage:
50 To 1000 Ppm
Application:
Drilling Wastewater Demulsifying Agent
Appearance:
Yellow Liquid
Active Content:
>= 40 Percent
Product PH:
2 To 4
Recommended PH Of Use:
5 To 12, Best Near 9
Typical Dosage:
50 To 1000 Ppm
Application:
Drilling Wastewater Demulsifying Agent
Oilfield Demulsifier For Drilling Wastewater Demulsifying Agent Emulsion Breaker

Oilfield Demulsifier for Drilling Wastewater

Bluwat Demulsifier is a high molecular cationic polymer designed to destabilize tough oilfield emulsions and speed up oil water separation in drilling and produced water treatment. It is water soluble, easy to dose, and performs across a wide pH range.

Product Introduction

The polymer carries strong cationic charge and disrupts interfacial tension in W O and O W systems. It breaks the stability of oil, colloids, and fine solids, forms larger flocs by molecular chain bridging, and accelerates phase separation in API and DAF units.

Key Advantages

  • Fast demulsification and clear effluent
  • Works from pH 5 to 12, best near 9
  • Low dosage by jar test, 50 to 1000 ppm typical
  • Synergy with PAC and PAM to polish TSS and oil
  • Easy to dilute and feed with standard equipment

Application Industries

  • Drilling and produced water treatment
  • Well workover and stimulation flows
  • Crude tank bottoms and slop oil handling
  • Pipeline terminal and gathering stations

How to Use

  1. Run jar tests to fix target dose
  2. Adjust wastewater pH to near 9 when feasible
  3. Dose neat or diluted solution into a mixing tank
  4. Rapid mix 1 to 3 minutes then slow mix 10 to 15 minutes
  5. Settle or float and remove separated oil and flocs

For difficult crudes, co dose with PAC and follow with PAM to enhance floc strength.

Technical Specifications

Item Specification
Appearance Yellow liquid
Active content >= 40 percent
Product pH 2 to 4
Recommended pH of use 5 to 12, best near 9
Typical dosage 50 to 1000 ppm

Packaging and Storage

  • 200 L plastic drums
  • 1000 L IBC tanks
  • Store indoors in original containers
  • Shelf life up to 12 months

Why Choose Bluwat Chemicals

We deliver practical oilfield water solutions with consistent quality, rapid technical support, and global supply capability. Our demulsifier helps reduce treatment cost, protect downstream membranes, and meet discharge or reuse targets.

Copyright Bluwat Chemicals. All rights reserved.