Highlight: 
                                                                                                                                                                                                                                                Yellow liquid chemical demulsifier, 40 percent chemical demulsifier, 50 to 1000 ppm chemical demulsifier
                              

Appearance:	Yellow Liquid	Active Content:	>= 40 Percent
Product PH:	2 To 4	Recommended PH Of Use:	5 To 12, Best Near 9
Typical Dosage:	50 To 1000 Ppm	Application:	Leather And Natural Plant Effluents Phase Separator Chemical

Appearance:	Yellow Liquid
Active Content:	>= 40 Percent
Product PH:	2 To 4
Recommended PH Of Use:	5 To 12, Best Near 9
Typical Dosage:	50 To 1000 Ppm
Application:	Leather And Natural Plant Effluents Phase Separator Chemical

40 percent Demulsifier For Leather And Natural Plant Effluents Phase Separator Chemical

Demulsifier for Leather and Natural Plant Effluents

Leather and plant processing generate oily and colloidal loads that are hard to separate. Bluwat Demulsifier breaks these emulsions, helps form strong flocs, and improves clarification efficiency.

Product Introduction

The cationic polymer disrupts emulsion stability and binds fine particles into larger, settleable flocs. It is water soluble and easy to dose in existing mixing tanks without new hardware.

Key Advantages

Fast break of animal fat and plant oil emulsions
Better sludge dewatering due to denser flocs
Low dosage and simple control
Effective with PAC and PAM finishing steps
Works from pH 5 to 12

Application Industries

Leather tanning and finishing
Animal by product and gelatin plants
Vegetable extraction and plant processing

Operating Guide

Run jar tests to find the dose
Adjust pH near 9 for a rapid split
Dose demulsifier before primary clarification
Use PAM for final polishing if turbidity is high

Typical dose range 50 to 1000 ppm based on oil and solids content.

Technical Specifications

Item	Specification
Appearance	Yellow to Brown liquid
Active content	>= 40 percent
Product pH	2 to 4
Recommended pH of use	5 to 12, best near 9
Typical dosage	50 to 1000 ppm

Packaging and Storage

200 L plastic drums or 1000 L IBC
Store sealed in a cool, dry place
Shelf life up to 12 months

Why Choose Bluwat Chemicals

We help processors meet discharge targets while controlling total cost. Bluwat offers reliable supply and application expertise from lab to full scale.

Tags:

Water Purifying Chemicals

Water Decoloring Agent

Anionic Polyacrylamide

Cationic Polyacrylamide

Polyaluminium Chloride

Quaternary Ammonium Polymer

Nonionic Polyacrylamide

Color Removal Chemical

Drilling Mud Additives

Dicyandiamide Formaldehyde Resin

Polyelectrolyte Flocculant

Ferric Sulphate

Color Fixing Agent

Coagulant And Flocculant

Plant Based Deodorant

Anti Foaming Chemicals

Chemical Demulsifier