products details

Home Products

PAC-01 White Powder Polyaluminium Chloride with 45-55% Basicity in 25kg Bags for Cosmetic Water Treatment

Brand Name:	BLUWAT
Model Number:	Blufloc PAC Series
MOQ:	5 tons
Price:	negotiable
Delivery Time:	Within 15 workdays recdive the payment or L/C
Payment Terms:	L/C, T/T, D/P,, D/A, Western Union

Detail Information

Product Description

Detail Information

Place of Origin:

China

Certification:

ISO Halal ZDHC

Product Model:

PAC-01

Chemical Name:

Polyaluminium Chloride

Appearance:

White Powder

Al2O3 Content:

30% Min.

Basicity:

45-55%

Water-insoluble Matter:

0.1% Max.

Drying Type:

Spray Dried

Preparation Concentration:

2-20% Solution Before Dosing

Typical Solid-product Dosage:

About 1-15 G/MT; Determine The Optimum By Jar Test

Standard Packaging:

25kg Inner Plastic Bag With Polypropylene Woven Outer Bag

Packaging Details:

25kg inner plastic bag with polypropylene woven outer bag

Supply Ability:

3500 tons per month

Highlight:

45-55% basicity PAC-01 polyaluminium chloride

25kg bag polyaluminium chloride for water treatment

PAC-01 polyaluminium chloride for cosmetic process

Product Description

Cosmetics Utility-Water Treatment

PAC-01 White Polyaluminium Chloride for Cosmetic Production-Water Clarification

Spray-dried white PAC developed to clarify incoming utility water before filtration and validated high-purity water treatment.

Al2O3 Content

30% Min.

Basicity

45–55%

Insolubles

0.1% Max.

Standard Packaging

25kg Bags

Product Short Description

PAC-01 is a spray-dried white powder polyaluminium chloride developed for cosmetic production-water clarification. It provides 30% min. Al2O3, 45–55% basicity and 0.1% max. insolubles. The product is supplied in 25kg bags and should be selected through jar tests using the actual incoming utility water used by a cosmetics or personal-care facility.

Product Overview

In cosmetic production-water clarification, the practical objective is to control raw-water turbidity before filtration and high-purity treatment used by the factory. PAC-01 is used as a coagulant, not as a complete treatment system.

Its role is to clarify incoming water in the central utility plant before validated polishing steps. The grade is positioned for drinking-water and color-sensitive process-water applications, and its spray-dried form dissolves rapidly when the solution is prepared correctly.

Treatment Problem and Causes

The relevant feed is typically incoming utility water used by a cosmetics or personal-care facility. The main difficulty is that mineral colloids and intermittent source-water solids can foul filters and destabilize downstream water preparation.

As a result, untreated water may show unstable turbidity, weak settling, short filter runs or poor solid-liquid separation. A useful product page must distinguish the removable suspended or colloidal fraction from dissolved contaminants that require other processes.

PAC-01 Solution

The recommended role for PAC-01 is to clarify incoming water in the central utility plant before validated polishing steps. It is normally applied before media filtration, carbon, membranes or disinfection selected by the facility.

When PAC hydrolyzes in water, positively charged aluminium species reduce particle repulsion. Hydroxide floc then enmeshes fine matter and creates aggregates that can be settled, floated or filtered. Effective rapid mixing must distribute the coagulant before slower floc growth begins.

Product Specifications

Parameter	Specification
Product model	PAC-01
Chemical name	Polyaluminium Chloride
Appearance	White powder
Al2O3 content	30% min.
Basicity	45–55%
Water-insoluble matter	0.1% max.
Drying type	Spray dried
Preparation concentration	2–20% solution before dosing
Typical solid-product dosage	About 1–15 g/MT; determine the optimum by jar test
Standard packaging	25kg inner plastic bag with polypropylene woven outer bag

Application Scenarios and Control Points

Relevant use cases include cosmetics plants, personal-care factories and clean utility-water systems.

Cosmetics Plants

Personal-Care Factories

Clean Utility-Water Systems

Operators should follow turbidity, filter performance, microbial-control barriers and final process-water specifications. These indicators show whether the treatment target is being achieved and whether the dose is creating unnecessary sludge or downstream carryover.

Turbidity

Filter Performance

Microbial-Control Barriers

Final Process-Water Specifications

The key process boundary is clear: this application is utility-water treatment, not addition of PAC to a cosmetic formulation.

How Polyaluminium Chloride Works

PAC is a pre-hydrolyzed inorganic polymeric coagulant. After dispersion, its cationic aluminium species adsorb on negatively charged particles and reduce the electrical barrier that keeps them apart. As hydrolysis continues, aluminium hydroxide floc provides a sweep-coagulation surface that captures fine particles.

Separation performance therefore depends on product dose, pH, alkalinity, mixing sequence, flocculation time and the selected settling, DAF or filtration equipment.

Incoming Utility Water

Representative incoming water is characterized before treatment selection.

PAC Coagulation

Fine suspended and colloidal matter is destabilized and incorporated into floc.

Solids Separation

Formed floc is removed by clarification, flotation or filtration.

Validated Polishing

Water proceeds to media, carbon, membrane or disinfection stages selected by the facility.

Recommended Application Approach

Characterize the incoming utility water used by a cosmetics or personal-care facility, including pH, turbidity or TSS and the contaminants that may remain dissolved.

Prepare the solid PAC as a 2–20% solution with clean water. Allow complete dispersion and keep the solution system clean.

Run a jar test around the TDS reference range of about 1–15 g/MT and reproduce the intended process position: before media filtration, carbon, membranes or disinfection selected by the facility.

Use rapid mixing for coagulant distribution, then slower mixing for floc growth. Avoid excessive shear after the floc has formed.

Select the lowest stable dose that meets the target the target while monitoring turbidity, filter performance, microbial-control barriers and final process-water specifications.

How to Choose the Right PAC Grade

Choose PAC-01 because PAC-01 provides a low-insoluble white option for visually sensitive water preparation. Start with the product specification, but make the final selection on representative water.

Compare at least three doses, include the current coagulant as a control and keep pH, mixing energy and settling time consistent. The TDS gives about 1–15 g/MT for solid PAC as a general reference; the optimum may differ with the water and must be confirmed by laboratory and plant trials.

PAC Grade Comparison

PAC-01 and PAC-02 are the starting grades for drinking-water and cleaner process-water duties. PAC-01 is white with 45–55% basicity, while PAC-02 is yellow with 45–85% basicity. PAC-031 is the industrial grade with 29% minimum Al2O3, 50–90% basicity and a higher allowable insoluble fraction. Grade selection should reflect treated-water requirements, feed variability and total treatment cost rather than color alone.

Why Work With Bluwat Chemicals

Bluwat Chemicals has manufactured water-treatment chemicals since 2000. The company operates three production bases, exports to more than 80 countries and has served over 5,000 industrial customers. For cosmetic production-water clarification, this experience supports grade matching, sample evaluation and communication between the buyer, sales team and technical team before scale-up.

Since 2000

Water-treatment chemical manufacturing experience

Production bases supporting product supply

80+

Export markets worldwide

Direct factory support includes batch COA, current TDS and SDS documents, packing checks and traceable quality control for the selected PAC grade. Buyers can compare PAC-01 with other PAC grades using actual water rather than relying only on product color or one headline parameter.

Batch COA

Current TDS and SDS Documents

Packing Checks

Traceable Quality Control

Sample Evaluation

PAC Grade Matching

Commercial terms, delivery schedule, freight and destination documentation are confirmed by the responsible sales representative.

Packaging, Solution Preparation and Storage

Solid PAC is packed in a 25kg inner plastic bag with a polypropylene woven outer bag. Store the sealed original package in a cool, dry place away from heat, flame and direct sunlight.

Prepare a 2–20% solution before dosing, using clean water and sufficient mixing. Do not use wet, contaminated or severely caked material without evaluation.

Frequently Asked Questions

Is PAC-01 suitable for cosmetic production-water clarification?

It is a candidate grade because PAC-01 provides a low-insoluble white option for visually sensitive water preparation. Suitability must still be verified with the actual water, treatment objective and downstream process.

What PAC dosage should the plant use?

The supplied TDS gives about 1–15 g/MT for solid PAC as a general reference. Start with a dose-response jar test and confirm the result at plant scale; do not copy a dose from another site.

How should the 25kg PAC powder be prepared?

Prepare a 2–20% solution using clean water and adequate mixing. Avoid dumping dry powder directly into a poorly mixed tank, and protect the stored product from moisture.

What should be checked after dosing PAC in cosmetic production-water clarification?

Track turbidity, filter performance, microbial-control barriers and final process-water specifications. Also verify the limitation that this application is utility-water treatment, not addition of PAC to a cosmetic formulation.

Tags:

Water Purifying Chemicals

Water Decoloring Agent

Anionic Polyacrylamide

Cationic Polyacrylamide

Polyaluminium Chloride

Quaternary Ammonium Polymer

Nonionic Polyacrylamide

Color Removal Chemical

Drilling Mud Additives

Dicyandiamide Formaldehyde Resin

Polyelectrolyte Flocculant

Ferric Sulphate

Color Fixing Agent

Coagulant And Flocculant

Plant Based Deodorant

Anti Foaming Chemicals

Chemical Demulsifier

Water Purifying Chemicals

Water Decoloring Agent

Anionic Polyacrylamide

Cationic Polyacrylamide

Polyaluminium Chloride

Quaternary Ammonium Polymer

Nonionic Polyacrylamide

Color Removal Chemical

Drilling Mud Additives

Dicyandiamide Formaldehyde Resin

Polyelectrolyte Flocculant

Ferric Sulphate

Color Fixing Agent

Coagulant And Flocculant

Plant Based Deodorant

Anti Foaming Chemicals

Chemical Demulsifier

products details

PAC-01 White Powder Polyaluminium Chloride with 45-55% Basicity in 25kg Bags for Cosmetic Water Treatment

45-55% basicity PAC-01 polyaluminium chloride

25kg bag polyaluminium chloride for water treatment

PAC-01 polyaluminium chloride for cosmetic process

PAC-01 White Polyaluminium Chloride for Cosmetic Production-Water Clarification

Product Short Description

Product Overview

Treatment Problem and Causes

PAC-01 Solution

Product Specifications

Application Scenarios and Control Points

How Polyaluminium Chloride Works

Incoming Utility Water

PAC Coagulation

Solids Separation

Validated Polishing

Recommended Application Approach

How to Choose the Right PAC Grade

PAC Grade Comparison

Why Work With Bluwat Chemicals

Packaging, Solution Preparation and Storage

Frequently Asked Questions

Is PAC-01 suitable for cosmetic production-water clarification?

What PAC dosage should the plant use?

How should the 25kg PAC powder be prepared?

What should be checked after dosing PAC in cosmetic production-water clarification?

Validate PAC-01 in the Central Utility-Water Plant