products details

Home Products

45-85% Basicity Yellow Powder PAC-02 Polyaluminium Chloride for High-Turbidity Water Treatment

Brand Name:	BLUWAT
Model Number:	Blufloc PAC Series
MOQ:	5 tons
Price:	negotiable
Delivery Time:	Within 15 workdays recdive the payment or L/C
Payment Terms:	L/C, T/T, D/P,, D/A, Western Union

Detail Information

Product Description

Detail Information

Place of Origin:

China

Certification:

ISO Halal ZDHC

Product Model:

PAC-02

Chemical Name:

Polyaluminium Chloride

Appearance:

Yellow Powder

Al2O3 Content:

30% Min.

Basicity:

45-85%

Water-insoluble Matter:

0.1% Max.

Drying Type:

Spray Dried

Preparation Concentration:

2-20% Solution Before Dosing

Typical Solid-product Dosage:

About 1-15 G/MT; Determine The Optimum By Jar Test

Standard Packaging:

25kg Inner Plastic Bag With Polypropylene Woven Outer Bag

Packaging Details:

25kg inner plastic bag with polypropylene woven outer bag

Supply Ability:

3500 tons per month

Highlight:

45-85% basicity polyaluminium chloride

yellow powder PAC-02 water treatment

25kg bag polyaluminium chloride high-turbidity

Product Description

High-Turbidity Raw-Water Coagulant

PAC-02 Yellow Polyaluminium Chloride for High-Turbidity Raw-Water Clarification

Spray-dried yellow PAC developed to form dense floc in storm-affected river and surface water containing heavy silt and clay.

Al2O3 Content

30% Min.

Basicity

45–85%

Insolubles

0.1% Max.

Standard Packaging

25kg Bags

Product Short Description

PAC-02 is a spray-dried yellow powder polyaluminium chloride developed for high-turbidity raw-water clarification. It provides 30% min. Al2O3, 45–85% basicity and 0.1% max. insolubles. The product is supplied in 25kg bags and should be selected through jar tests using the actual storm-affected river or surface water with heavy silt and clay.

Product Overview

In high-turbidity raw-water clarification, the practical objective is to form dense floc quickly while preventing excessive chemical use and sludge production. PAC-02 is used as a coagulant, not as a complete treatment system.

Its role is to destabilize the fine fraction so conventional clarification can remove it with the settleable solids. The grade is positioned for drinking-water and general process-water applications, and its spray-dried form dissolves rapidly when the solution is prepared correctly.

Treatment Problem and Causes

The relevant feed is typically storm-affected river or surface water with heavy silt and clay. The main difficulty is that runoff introduces a broad particle-size distribution, and the finest clay remains stable even when larger sand settles.

As a result, untreated water may show unstable turbidity, weak settling, short filter runs or poor solid-liquid separation. A useful product page must distinguish the removable suspended or colloidal fraction from dissolved contaminants that require other processes.

PAC-02 Solution

The recommended role for PAC-02 is to destabilize the fine fraction so conventional clarification can remove it with the settleable solids. It is normally applied after grit removal where needed, before rapid mixing, flocculation and sedimentation.

When PAC hydrolyzes in water, positively charged aluminium species reduce particle repulsion. Hydroxide floc then enmeshes fine matter and creates aggregates that can be settled, floated or filtered. Effective rapid mixing must distribute the coagulant before slower floc growth begins.

Product Specifications

Parameter	Specification
Product model	PAC-02
Chemical name	Polyaluminium Chloride
Appearance	Yellow powder
Al2O3 content	30% min.
Basicity	45–85%
Water-insoluble matter	0.1% max.
Drying type	Spray dried
Preparation concentration	2–20% solution before dosing
Typical solid-product dosage	About 1–15 g/MT; determine the optimum by jar test
Standard packaging	25kg inner plastic bag with polypropylene woven outer bag

Application Scenarios and Control Points

Relevant use cases include flood-season intakes, river-water plants and construction-affected sources.

Flood-Season Intakes

River-Water Plants

Construction-Affected Sources

Operators should follow raw-water turbidity, settled sludge volume, supernatant clarity, floc shear resistance and filter load. These indicators show whether the treatment target is being achieved and whether the dose is creating unnecessary sludge or downstream carryover.

Raw-Water Turbidity

Settled Sludge Volume

Supernatant Clarity

Floc Shear Resistance

Filter Load

The key process boundary is clear: very high solids may also require grit removal, presedimentation or staged treatment.

How Polyaluminium Chloride Works

PAC is a pre-hydrolyzed inorganic polymeric coagulant. After dispersion, its cationic aluminium species adsorb on negatively charged particles and reduce the electrical barrier that keeps them apart. As hydrolysis continues, aluminium hydroxide floc provides a sweep-coagulation surface that captures fine particles.

Separation performance therefore depends on product dose, pH, alkalinity, mixing sequence, flocculation time and the selected settling, DAF or filtration equipment.

Grit Removal

Coarse sand and heavy solids are removed first where raw-water conditions require it.

Rapid Mixing

PAC-02 is distributed quickly to destabilize the fine clay and colloidal fraction.

Flocculation

Controlled slower mixing supports dense floc growth without excessive shear.

Sedimentation

Settleable solids and destabilized fines are removed before filtration.

Recommended Application Approach

Characterize the storm-affected river or surface water with heavy silt and clay, including pH, turbidity or TSS and the contaminants that may remain dissolved.

Prepare the solid PAC as a 2–20% solution with clean water. Allow complete dispersion and keep the solution system clean.

Run a jar test around the TDS reference range of about 1–15 g/MT and reproduce the intended process position: after grit removal where needed, before rapid mixing, flocculation and sedimentation.

Use rapid mixing for coagulant distribution, then slower mixing for floc growth. Avoid excessive shear after the floc has formed.

Select the lowest stable dose that meets the target while monitoring raw-water turbidity, settled sludge volume, supernatant clarity, floc shear resistance and filter load.

How to Choose the Right PAC Grade

Choose PAC-02 because PAC-02 combines 30% minimum Al2O3 with broad basicity for changing high-solids water. Start with the product specification, but make the final selection on representative water.

Compare at least three doses, include the current coagulant as a control and keep pH, mixing energy and settling time consistent. The TDS gives about 1–15 g/MT for solid PAC as a general reference; the optimum may differ with the water and must be confirmed by laboratory and plant trials.

PAC Grade Comparison

PAC-01 and PAC-02 are the starting grades for drinking-water and cleaner process-water duties. PAC-01 is white with 45–55% basicity, while PAC-02 is yellow with 45–85% basicity. PAC-031 is the industrial grade with 29% minimum Al2O3, 50–90% basicity and a higher allowable insoluble fraction. Grade selection should reflect treated-water requirements, feed variability and total treatment cost rather than color alone.

Why Work With Bluwat Chemicals

Bluwat Chemicals has manufactured water-treatment chemicals since 2000. The company operates three production bases, exports to more than 80 countries and has served over 5,000 industrial customers. For high-turbidity raw-water clarification, this experience supports grade matching, sample evaluation and communication between the buyer, sales team and technical team before scale-up.

Since 2000

Water-treatment chemical manufacturing experience

Production bases supporting product supply

80+

Export markets worldwide

Direct factory support includes batch COA, current TDS and SDS documents, packing checks and traceable quality control for the selected PAC grade. Buyers can compare PAC-02 with other PAC grades using actual water rather than relying only on product color or one headline parameter.

Batch COA

Current TDS and SDS Documents

Packing Checks

Traceable Quality Control

Sample Evaluation

PAC Grade Matching

Commercial terms, delivery schedule, freight and destination documentation are confirmed by the responsible sales representative.

Packaging, Solution Preparation and Storage

Solid PAC is packed in a 25kg inner plastic bag with a polypropylene woven outer bag. Store the sealed original package in a cool, dry place away from heat, flame and direct sunlight.

Prepare a 2–20% solution before dosing, using clean water and sufficient mixing. Do not use wet, contaminated or severely caked material without evaluation.

Frequently Asked Questions

Is PAC-02 suitable for high-turbidity raw-water clarification?

It is a candidate grade because PAC-02 combines 30% minimum Al2O3 with broad basicity for changing high-solids water. Suitability must still be verified with the actual water, treatment objective and downstream process.

What PAC dosage should the plant use?

The supplied TDS gives about 1–15 g/MT for solid PAC as a general reference. Start with a dose-response jar test and confirm the result at plant scale; do not copy a dose from another site.

How should the 25kg PAC powder be prepared?

Prepare a 2–20% solution using clean water and adequate mixing. Avoid dumping dry powder directly into a poorly mixed tank, and protect the stored product from moisture.

What should be checked after dosing PAC in high-turbidity raw-water clarification?

Track raw-water turbidity, settled sludge volume, supernatant clarity, floc shear resistance and filter load. Also verify the limitation that very high solids may also require grit removal, presedimentation or staged treatment.

Tags:

Water Purifying Chemicals

Water Decoloring Agent

Anionic Polyacrylamide

Cationic Polyacrylamide

Polyaluminium Chloride

Quaternary Ammonium Polymer

Nonionic Polyacrylamide

Color Removal Chemical

Drilling Mud Additives

Dicyandiamide Formaldehyde Resin

Polyelectrolyte Flocculant

Ferric Sulphate

Color Fixing Agent

Coagulant And Flocculant

Plant Based Deodorant

Anti Foaming Chemicals

Chemical Demulsifier

Water Purifying Chemicals

Water Decoloring Agent

Anionic Polyacrylamide

Cationic Polyacrylamide

Polyaluminium Chloride

Quaternary Ammonium Polymer

Nonionic Polyacrylamide

Color Removal Chemical

Drilling Mud Additives

Dicyandiamide Formaldehyde Resin

Polyelectrolyte Flocculant

Ferric Sulphate

Color Fixing Agent

Coagulant And Flocculant

Plant Based Deodorant

Anti Foaming Chemicals

Chemical Demulsifier

products details

45-85% Basicity Yellow Powder PAC-02 Polyaluminium Chloride for High-Turbidity Water Treatment

45-85% basicity polyaluminium chloride

yellow powder PAC-02 water treatment

25kg bag polyaluminium chloride high-turbidity

PAC-02 Yellow Polyaluminium Chloride for High-Turbidity Raw-Water Clarification

Product Short Description

Product Overview

Treatment Problem and Causes

PAC-02 Solution

Product Specifications

Application Scenarios and Control Points

How Polyaluminium Chloride Works

Grit Removal

Rapid Mixing

Flocculation

Sedimentation

Recommended Application Approach

How to Choose the Right PAC Grade

PAC Grade Comparison

Why Work With Bluwat Chemicals

Packaging, Solution Preparation and Storage

Frequently Asked Questions

Is PAC-02 suitable for high-turbidity raw-water clarification?

What PAC dosage should the plant use?

How should the 25kg PAC powder be prepared?

What should be checked after dosing PAC in high-turbidity raw-water clarification?

Validate PAC-02 With Storm-Affected Raw Water