White Powder Polyluminium Chloride Coagulant in Drinking Water Treatment Process
Description:
Bluwat PAC-01 grade is white powder poly aluminum chloride. It has low basicity of 40-55%, excellent at reducing particles while maintaining good phosphorus removal properties, and effective coagulant for treatment of both drinking water and wastewater.
They react to form insoluble aluminum poly-hydroxides which precipitate in big volumetric flocs. The flocs absorb suspended pollutants in the water which are precipitated with the PAC and can together be easily removed.
PAC can be used as a flocculant for all types of water treatment, drinking water, industrial wastewater, urban wastewater and in the paper industry.
It is also widely applied in water purification, wastewater treatment, precision cast, paper production, pharmaceutical industry, and daily chemicals.
Polyaluminum Chloride (PAC) compounds were developed to provide better performance than alum could offer. While they accomplished this goal, they also provide additional cost benefits when compared to alum. PAC has a minimal impact on pH and therefore minimized the need to feed adjustment chemicals. And it is able to do a better job while using 30-60% less aluminum on average. This translates roughly to a similar percentage reduction in the amount of sludge produced.
Bluwat PAC-01 Grade Specification:
PAC Manufacturer 30% Water Treatment Chemical | |
Product Name: | Polyaluminium Chloride (Poly Aluminum Chloride, Polyaluminum Chloride, Poly Aluminium Chloride, Aluminum Polychride, PAC ) |
CAS#: | 1327-41-9 |
Appearance: | White powder |
Description: |
BLUWAT produces different grades of Polyaluminum Chlorides (PAC) in powder and liquid forms. The highly charged Al in the products is optimized for the best performance for the different basicities of PAC. The low to medium basicity products are effective coagulants for the treatment of both drinking water and wastewater. And the medium to high basicity products is excellent for all ranges of wastewater treatment. |
Item | Data |
Apperance | Solid powder, white yellow |
Al2O3 | 30% min |
Basicity | 40-55% |
Insoluble | 0.5 max |
PH | 3.0-5.0 |
Properties:
1 |
Its dosage lower than aluminum sulfate (based on Al2O3) and water treatment cost is lower than other inorganic flocculants. |
2 |
The product can cause quick formation of flocs, big flocs formation and rapid precipitation. Its treatment capacity is 1.3-3.0 times of other inorganic flocculants. |
3 |
It enjoys wide-range adaptability for different-temperature source water and a good solubility. |
4 |
It is slightly corrosive and easy for operation. |
5 |
The liquid product is suitable for automatic dosing. Furthermore, it will not block pipes over long-time Polyaluminium Chloride |
6 |
Low acidity is lower than other inorganic coagulants. |
Polyaluminium Chloride Benefits:
Package and Storage:
Keywords: poly aluminium chloride suppliers, spray drying powder, pac powder