Yixing bluwat chemicals co.,ltd 86-510-87821568 eric.min@bluwat.com.cn
High Molecular Weight Nonionic Polymer Polyacrylamide Similar to N2100 in Water Treatment

High Molecular Weight Nonionic Polymer Polyacrylamide Similar to N2100 in Water Treatment

  • High Light

    non - ionic polyacrylamide


    water treatment polymer

  • Chemical Name
    Nonionic Polyelectrolyte
  • Trade Name
    Blufloc NPAM
  • Molecular Weight
  • Viscosity
  • Application
    Paper Wastewater Treatment
  • Capacity
  • Place of Origin
  • Brand Name
  • Certification
    ISO9001, SGS, BV
  • Model Number
    Blufloc N830
  • Minimum Order Quantity
  • Price
  • Packaging Details
    30kgs, 50kgs, 250kgs, 1250kgs drums
  • Delivery Time

High Molecular Weight Nonionic Polymer Polyacrylamide Similar to N2100 in Water Treatment

Product Description

  1. Blufloc nonionic polyacrylamide is working as a flocculant, mostly for solid and liquid separation in water treatment and sludge dewatering, also used as a fraction reduction agent in drilling.
  2. The range of molecular weight is from 8-12million, with a charge density of less than 3%.
  3. It is easy to be dissolved in water, high viscosity.
  4. Soluble in water, safe, non-toxic, hydrolytic stable, is not sensitive to the change of pH value, anti-chlorine. Harmless, no-flammable, and non-explosive, it can be stored at room temperature, and it cannot be placed in the sun. It is slightly acidic, when skin contact, wash immediately with plenty of water.
Blufloc Nonionic Polyacrylamide:
Trade Name: Blufloc APAM
Active Ingredient: High molecular weight polymer
Chemical Name: Nonionic Polyelectrolyte 
Standard: GB17514-2008
Certification: ISO, SGS
MOQ: 500kgs
Port of Loading: Shanghai Port, China
Delivery Time: Within 10 Working Days After Got Your Payment
Sample: Free to test
Blufloc Nonionic Polyacrylamide Specifications:
Appearance: Off-White Granular Powder
Ionic Charge: Nonionic
Molecular Weight: 8-12million
Hydrolysis Degree: <3%
Approximate Brookfield Viscosity at 25° C: 300-800cps
Bulk Density: About 0.6-0.8
Solid Content: 89%min
Active Content: 100%
Specific Gravity at 25°C: 1.01-1.1
Recommended Working Concentration: 0.1%

High Molecular Weight Nonionic Polymer Polyacrylamide Similar to N2100 in Water Treatment 0


Advantages of Blufloc Polyacrylamide:

  • Easily soluble in water; dissolves rapidly.
  • Can eliminate the use of alum & further ferric salts when used as primary coagulants.
  • Reduction in the sludge of the dewatering process system.
  • Faster sedimentation, better flocculation.
  • Non-pollution (no aluminum, chlorine, heavy metal ions, etc.).

How to Use Blufloc Polyacrylamide?

Application and Dosage:
The dosage range of varies from 0.2 - 3.0 ppm depending upon the type of effluent and application. It is always advised to do a jar test for evaluating the functioning and approximate dosage.
Jar Test:

Put a sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm, and then slowly agitate at 60rpm. Determine the floc properly at this time and note the sedimentation and clarity of the top solution.
Procedure and precautions upon dispersion and dissolving flocculants:
Dissolving time: The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature, and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. An incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant.
Agitation speed: The ideal revolution of the agitator is between 200-400rpm. A high-speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.
Dissolving concentration: Flocculants should be standardly dissolved to 0.1-0.2% concentration. It is also effective to start dissolving at a slightly higher concentration and then dilute the flocculant mixture immediately before use.
Handling measures and precautions:
Proper human safety products such as Splash goggles, lab coats, vapor respirators, gloves, and boots should be worn while handling and applying chemicals. Splashes on the skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer to MSDS for more details.

Packaging & Shipping

  1. 25kg net kraft paper bags or white PE bags on a pallet.
  2. Stored in the original packaging in a cool and dry place.
  3. Shelf life: 2 years.


High Molecular Weight Nonionic Polymer Polyacrylamide Similar to N2100 in Water Treatment 1