Nonionic PAM for tailings, wastewater and textile-process screening
Blufloc N630 is a nonionic polyacrylamide (NPAM) polymer flocculant supplied as off-white granular powder with at least 89% solids. It is listed for water treatment and selected mineral or textile-process duties. Compare the grade-specific TDS and actual application response before final selection.
Nonionic polyacrylamide sold as Blufloc N630, with a High molecular-weight classification in the property table.
Separate TDS anionic-degree entry: Low (3-6%). Compare this specification with the actual application response.
Off-white granular powder, 20-100 mesh, with 89% minimum solid content. Packaging is selected from the options listed for this grade.
| Property | Grade-specific TDS value |
|---|---|
| Product grade | Blufloc N630 |
| Appearance | Off-White Granular Powder |
| Ionic Charge | Non-ionic |
| Particle Size | 20-100 mesh |
| Molecular weight (TDS classification) | High |
| Anionic degree (separate TDS entry) | Low (3-6%) |
| Solid Content | 89% Min |
| Bulk density (unit not stated in TDS) | About 0.8 |
| Specific Gravity at 25°C | 1.01-1.1 |
| Recommended Working Concentration | <0.5% |
| Storage temperature (°C) | 0 - 35 |
| Shelf Life | 2 years |
| Solution concentration in application instructions | 0.1-0.5% |
Molecular weight is given as a TDS classification, without a numerical range. Bulk-density units are not specified in the supplied document. The specific-gravity entry gives 25°C but no sample concentration. The pH test concentration is not stated; confirm it for specification comparisons. The sheet labels the grade Non-ionic while separately listing an anionic degree. Both entries are retained; confirm the test definition for the intended use.
N630 is listed for mining, metallurgy and coal tailings thickening and water recovery, wastewater clarification and sludge treatment, and textile printing or coating thickening and wastewater sedimentation. Drilling fluids, fluid-loss control and lubrication are also listed. Separation and thickening are different duties; use the actual stream or formulation in each trial rather than transferring a wastewater result to a textile recipe or drilling fluid.
N630 is listed for tailings thickening and water recovery in mining, metallurgy and coal processing. Compare recovered-water quality and the separated-solids condition using representative slurry.
The sheet lists raw-water and wastewater clarification, sludge treatment, textile printing and coating thickening, and wastewater sedimentation. It also identifies acidic suspended wastewater as an evaluation area without giving a numerical operating-pH window.
Drilling fluids, fluid-loss control and lubrication are listed. A drilling-fluid or textile-thickening evaluation requires the actual complete formulation; a wastewater clarification result does not establish those formulation properties.
N630 and N830 are both sold as nonionic PAM grades. Their TDS anionic-degree entries are 3-6% and 2-5%, respectively, and their application lists differ. Confirm the definition of that specification and the current molecular-weight class before setting a purchasing comparison.
| Grade | Molecular-weight class | TDS charge entry | Working concentration |
|---|---|---|---|
| N630 | High | Low (3-6%) | <0.5% |
| N830 | High | Very Low (2-5% ) | 0.1-0.5% |
This comparison describes TDS specification differences. Select grade and dose using the actual feed and equipment results.
The property table specifies a working concentration below 0.5%, while the application instructions give 0.1-0.5%. Confirm the upper endpoint and intended make-down concentration before preparing a final operating procedure.
The supplied instructions specify plastic, enamel or fiberglass containers for solution storage and advise against metal containers. Request the appropriate dissolution and mixing procedure for the actual water and equipment; no fixed mixing speed or dissolution time is provided.
Compare doses on the actual water, sludge, slurry or formulation. Record the product grade, solution concentration, dose basis, feed condition and separation observations. The TDS requires dose selection from laboratory results.
Include the existing coagulant or process-aid program in the evaluation. Confirm liquid quality and solids handling under equipment conditions before routine dosing; the TDS does not define one chemical-addition sequence for every application.
Packaging listed for Blufloc N630: 25 kg polybags or 25 kg Kraft paper bags. Confirm the selected pack, required quantity and destination with the quotation.
Store in the original packaging in a cool, dry place away from heat, flame and direct sunlight. The nonionic-grade instructions also state protection from moisture. The listed storage temperature is 0-35°C. The TDS states a two-year shelf life. Follow the current product label and SDS for handling instructions.
Yixing Bluwat Chemicals Co., Ltd. is a manufacturer and exporter of water treatment chemicals based in Yixing, Jiangsu, China. Our business began in 2000, the company was formally established in 2002, and our Yixing plant began production in 2004.
Bluwat operates three production bases and supplies customers in around 100 countries and regions. Our portfolio includes Blufloc polyacrylamide powders and emulsions, Water Decoloring Agent, PolyDADMAC, Polyamine, PAC, ACH, ferric sulphate and specialty treatment chemicals.
Our team supports product selection around the actual water, sludge or process stream. For a purchasing review, request the current grade-specific TDS, SDS and batch quality documents, and discuss sample evaluation, packaging and export requirements with Bluwat.
Share your treatment objective, feed information and existing chemical program so that the discussion addresses the intended use of N630. Manufacturing supply, grade documentation and application evaluation should be reviewed together when preparing the order.
Learn about Bluwat ChemicalsThe sheet labels the ionic type Non-ionic and separately lists anionic degree as Low (3-6%). These are the supplier's stated entries; confirm the specification definition rather than treating the grade as having a stated zero ionic content.
The description says Medium while the typical-properties table says High. No numerical range is provided. Confirm the current grade classification before specifying it.
Related product names include Nonionic Polyacrylamide, Nonionic PAM, NPAM and Polymer Flocculant. Keep N630 with the name when enquiring, because a general PAM name does not identify a specific grade.
Establish the dose by laboratory trials and confirmation in the intended equipment. The working-concentration entry <0.5% describes the prepared solution; it is not a treatment dose in mg/L.
Compare it with the existing product on the same feed and dose basis. The TDS does not establish automatic equivalence to another grade or unconditional replacement of a coagulant program.
Contact Bluwat with the full grade code, application, feed information, required quantity, packaging and destination. Request current grade-specific technical and quality documents and discuss sample evaluation for the intended duty.
Tell Bluwat the grade, application, required quantity and packaging. Discuss representative sample testing and request the current product specification before final selection.
Enquire About N630Explore Blufloc PAM Powder