logo
Good price  online

products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
Nonionic Polyacrylamide
Created with Pixso. Blufloc N830 Very Low Charge Degree 2-5% Nonionic Polyacrylamide NPAM Polymer Flocculant for Mineral Separation

Blufloc N830 Very Low Charge Degree 2-5% Nonionic Polyacrylamide NPAM Polymer Flocculant for Mineral Separation

Brand Name: Bluwat
Model Number: N830
MOQ: 1 Ton
Price: negotiable
Delivery Time: 5-8 Working Days
Payment Terms: L/C,D/A,D/P,T/T
Detail Information
Place of Origin:
China
Certification:
ZDHC, Halal, ISO
Appearance:
Off-white Granular Powder
Ionic Charge:
Cationic
Particle Size:
20-100 Mesh
Molecular Weight:
High
Charge Degree:
Very Low (2-5%)
Solid Content:
89% Minimum
Bulk Density (TDS Unit Not Stated):
About 0.8
Specific Gravity At 25°C:
1.01-1.1
Recommended Working Concentration:
0.1-0.5%
PH (Test Concentration Not Stated):
4-9
Storage Temperature:
0-35°C
Packaging Details:
25 kg Kraft paper bags with inner plastic liners
Highlight:

Nonionic Polyacrylamide NPAM flocculant

,

Low charge polyacrylamide mineral separation

,

Blufloc N830 polymer flocculant

Product Description
BLUFLOC · NONIONIC POLYACRYLAMIDE

Blufloc N830 Nonionic Polyacrylamide NPAM Polymer Flocculant for Mineral Separation

Nonionic PAM for mineral separation and phosphoric-acid gypsum trials

Blufloc N830 is a nonionic polyacrylamide (NPAM) polymer flocculant supplied as off-white granular powder with at least 89% solids. It is listed for water treatment and selected mineral or textile-process duties. Compare the grade-specific TDS and actual application response before final selection.

Molecular-weight class
High
TDS anionic degree
2-5%
Solid content
89% min.
Working concentration
0.1-0.5%

What Is Blufloc N830?

Blufloc N830 is a high molecular weight nonionic polyacrylamide powder, also called nonionic PAM or NPAM. It is supplied as free-flowing, off-white granules for evaluating flocculation, clarification, sludge treatment and selected process-industry applications.

Related product names: Nonionic Polyacrylamide · Nonionic PAM · NPAM · Polymer Flocculant.

N830 Product Highlights

Defined grade identity

Nonionic polyacrylamide sold as Blufloc N830, with a High molecular-weight classification in the property table.

Grade-specific charge entry

Separate TDS anionic-degree entry: Very Low (2-5% ). Compare this specification with the actual application response.

Powder supply format

Off-white granular powder, 20-100 mesh, with 89% minimum solid content. Packaging is selected from the options listed for this grade.



N830 Technical Specifications

Property Grade-specific TDS value
Product grade Blufloc N830
Appearance Off-White Granular Powder
Ionic Charge Non-ionic
Particle Size 20-100 mesh
Molecular weight (TDS classification) High
Anionic degree (separate TDS entry) Very Low (2-5%)
Solid Content 89% Min
Bulk density (unit not stated in TDS) About 0.8
Specific Gravity at 25°C 1.01-1.1
Recommended Working Concentration 0.1-0.5%
pH (Test concentration not stated) 6-9
Storage temperature (°C) 0 - 35
Shelf Life 2 years

Molecular weight is given as a TDS classification, without a numerical range. Bulk-density units are not specified in the supplied document. The specific-gravity entry gives 25°C but no sample concentration. The pH test concentration is not stated; confirm it for specification comparisons. The sheet labels the grade Non-ionic while separately listing an anionic degree. Both entries are retained; confirm the test definition for the intended use.

N830 Applications and Process Guidance

The N830 TDS specifically includes gypsum separation during wet-process phosphoric-acid purification, together with mining-water recovery, coal washing and textile printing or sizing thickening. A phosphoric-acid trial should use the actual acid and gypsum-bearing feed at the intended separation stage. The sheet does not give an acid concentration, operating-pH window, recovery percentage or treatment dose.

Wet-process phosphoric-acid gypsum separation

The supplied N830 TDS names gypsum separation during wet-process phosphoric-acid purification. Use the actual feed and separator conditions in a qualification; the document gives no acid concentration, recovery percentage or fixed polymer dose.

Mining-water recovery and coal washing

Mining-water recovery and coal washing are listed alongside water and wastewater flocculation, clarification, and sludge thickening or dewatering. Assess the liquid and solids outputs for the intended process duty.

Textile and other process uses

Textile printing and sizing thickening and petroleum or gas-field use are included. The source also identifies acidic suspended wastewater as an evaluation area. Confirm the complete formulation and end-use requirements for the proposed application.

How to Select N830 and Compare Related Grades

N830 is classified Non-ionic and separately lists a Very Low anionic degree of 2-5%. N630 lists 3-6% and a different application scope. Review those supplier specifications and the process result together; the grade code alone does not establish a direct substitute.

Grade Molecular-weight class TDS charge entry Working concentration
N830 High Very Low (2-5% ) 0.1-0.5%
N630 High Low (3-6%) <0.5%

This comparison describes TDS specification differences. Select grade and dose using the actual feed and equipment results.

Solution Preparation and Dosing Evaluation

1

Prepare the listed working solution

The TDS recommends a 0.1-0.5% solution before use. This is the prepared polymer-solution concentration, not a fixed dose in the treatment stream.

2

Follow the grade-specific make-down instructions

The supplied instructions specify plastic, enamel or fiberglass containers for solution storage and advise against metal containers. Request the appropriate dissolution and mixing procedure for the actual water and equipment; no fixed mixing speed or dissolution time is provided.

3

Establish the dose on representative feed

Compare doses on the actual water, sludge, slurry or formulation. Record the product grade, solution concentration, dose basis, feed condition and separation observations. The TDS requires dose selection from laboratory results.

4

Confirm the result in the intended equipment

Include the existing coagulant or process-aid program in the evaluation. Confirm liquid quality and solids handling under equipment conditions before routine dosing; the TDS does not define one chemical-addition sequence for every application.

Packaging Storage and Shelf Life

Packaging listed for Blufloc N830: 25 kg polybags or 25 kg paper bags. Confirm the selected pack, required quantity and destination with the quotation.

Store in the original packaging in a cool, dry place away from heat, flame and direct sunlight. The nonionic-grade instructions also state protection from moisture. The listed storage temperature is 0-35°C. The TDS states a two-year shelf life. Follow the current product label and SDS for handling instructions.

About Bluwat Chemicals

Yixing Bluwat Chemicals Co., Ltd. is a manufacturer and exporter of water treatment chemicals based in Yixing, Jiangsu, China. Our business began in 2000, the company was formally established in 2002, and our Yixing plant began production in 2004.

Bluwat operates three production bases and supplies customers in around 100 countries and regions. Our portfolio includes Blufloc polyacrylamide powders and emulsions, Water Decoloring Agent, PolyDADMAC, Polyamine, PAC, ACH, ferric sulphate and specialty treatment chemicals.

Our team supports product selection around the actual water, sludge or process stream. For a purchasing review, request the current grade-specific TDS, SDS and batch quality documents, and discuss sample evaluation, packaging and export requirements with Bluwat.

Working with Bluwat on N830

Share your treatment objective, feed information and existing chemical program so that the discussion addresses the intended use of N830. Manufacturing supply, grade documentation and application evaluation should be reviewed together when preparing the order.

Frequently Asked Questions About N830

Is N830 listed for phosphoric-acid processing?

Yes. The TDS includes gypsum separation in wet-process phosphoric-acid purification. Evaluate the polymer using the actual feed and intended separation conditions.

Which related product names can buyers use for N830?

N830 can be described as nonionic polyacrylamide, NPAM, nonionic PAM or a polymer flocculant. Keep the grade code with the name so that the enquiry identifies the correct product.

What other names are used for Blufloc N830?

Related product names include Nonionic Polyacrylamide, Nonionic PAM, NPAM and Polymer Flocculant. Keep N830 with the name when enquiring, because a general PAM name does not identify a specific grade.

What dose of N830 should be used?

Establish the dose by laboratory trials and confirmation in the intended equipment. The working-concentration entry 0.1-0.5% describes the prepared solution; it is not a treatment dose in mg/L.

Can N830 replace an existing treatment polymer?

Compare it with the existing product on the same feed and dose basis. The TDS does not establish automatic equivalence to another grade or unconditional replacement of a coagulant program.

How do I request N830 from Bluwat?

Contact Bluwat with the full grade code, application, feed information, required quantity, packaging and destination. Request current grade-specific technical and quality documents and discuss sample evaluation for the intended duty.

Request N830 Technical Information or a Quotation

Tell Bluwat the grade, application, required quantity and packaging. Discuss representative sample testing and request the current product specification before final selection.