products details

Home Products

Anionic Polyacrylamide APAM 2-Year Shelf Life 89% Min Solid for Water-Based Drilling Mud Viscosity Control CAS 9003-05-8 ISO 9001 Manufacturer 25kg PE Bag

Brand Name:	Blufloc
MOQ:	1000kgs
Price:	Negotiation
Delivery Time:	10 working days after received your payment
Payment Terms:	T/T or L/C

Detail Information

Product Description

Detail Information

Place of Origin:

China

Certification:

ISO/HALAL/ZDHC

Full Name:

Polyacrylamide Powder

Brand Name:

BLUFLOC

Appearance:

White Powder

Ionic Character:

Anionic

Polymer Type:

Water-Soluble Anionic Copolymer

Product Category:

Drilling Fluid Additive

Application Grade:

Industrial And Oilfield Drilling Grade

Particle Size:

20–100 Mesh

Molecular Weight:

5–25 Million Across The Anionic Grade Family

Anionic Degree:

5–100% Across The Anionic Grade Family

Solid Content:

89% Minimum

Shelf Life:

2 Years

Packaging Details:

25 kg PE bag, 25 kg kraft paper bag, 750 kg net big bags

Supply Ability:

5,000MT per month

Product Description

BLUFLOC ANIONIC POLYACRYLAMIDE

Product overview

A drilling mud needs enough carrying capacity to transport cuttings while remaining manageable through pumps, surface equipment and the annulus. Blufloc anionic polyacrylamide can be screened as a viscosity-building component where the selected grade is compatible with the water chemistry, clay system and operating temperature.

Product selection should begin with the required rheological profile, rather than a single funnel-viscosity target. Molecular weight, anionic charge and polymer concentration affect solution behavior. The 5–25 million molecular-weight range covers different grades; the highest molecular weight is not automatically the most suitable choice for a particular mud.

89% minimum solids

20–100 mesh

25 kg PE bag

Product benefits

Dry powder supply

Dry powder supply supports planned stockholding and on-site preparation without transporting a ready-made dilute solution.

Application-based selection

Grade selection allows formulators to compare viscosity development against pumpability and solids-control requirements.

Clear purchasing criteria

The specified minimum solids and particle-size range provide clear purchasing criteria for evaluating incoming material.

Technical specifications

Parameter	Specification
Brand and product family	Blufloc anionic polyacrylamide powder
Chemical identity	Anionic polyacrylamide APAM; CAS 9003-05-8
Appearance	Off-white granular powder
Ionic charge	Anionic
Particle size	20–100 mesh
Molecular weight	5–25 million across the anionic grade family
Anionic degree	5–100% across the anionic grade family
Solid content	89% minimum
Residual monomer	0.05% maximum
pH of 1% aqueous solution	6–8
General solution preparation	0.1–0.5%; final treatment concentration is application dependent
Powder storage temperature	0–35°C
Powder shelf life	2 years under recommended storage conditions

Molecular weight and anionic degree are family ranges, not a single grade specification. Confirm the selected grade and agreed supply criteria before ordering. ISO 9001 refers to the manufacturer’s quality management system, not a guarantee of application performance.

Grade selection for this application

Provide the make-up water analysis, bentonite content, existing additives, expected circulating temperature and target fluid properties. Compare candidate grades in the complete mud because dissolved salts, calcium, drilled solids and chemical interactions can change the result obtained in clean water.

Assess low-shear response, plastic viscosity, yield point and gel development alongside filtration and circulation pressure. Excessive thickening can increase hydraulic demand or complicate solids removal. A favorable laboratory viscosity result should therefore be followed by a controlled system trial.

Application evaluation and use

Prepare a base-mud control and candidate APAM samples using identical water, clay hydration and mixing conditions.

Measure a concentration series after complete hydration; record the instrument, temperature and test speed for every viscosity result.

Check rheology and filtration after representative aging and mechanical handling, then examine compatibility with the solids-control equipment.

Select a treatment level that meets the agreed carrying-capacity and hydraulic limits, and establish adjustment criteria for field use.

Solution preparation and dosing

Use clean, compatible make-up water and add the powder gradually into an established mixing flow. Avoid dumping powder in one location, which can create lumps with dry cores. The TDS gives 0.1–0.5% as general solution-preparation guidance. If specified on an as-supplied powder mass basis, this corresponds to 1–5 kg of powder per 1,000 kg of final solution; agree the concentration basis for the project.

Allow approximately one hour of agitation as a starting reference, then confirm complete hydration. Water quality, temperature, grade and equipment affect the required time. The TDS’s 200–400 rpm reference is equipment dependent and should not be scaled to a different tank solely by rpm. Avoid severe shear after hydration. Determine the final treatment dosage through the application tests described above.

Packaging storage and handling

The featured packaging is a 25 kg PE bag with an inner plastic liner. The TDS also lists 25 kg kraft paper or PE bags and 750 kg net big bags. Store powder dry, protected from direct sunlight and at 0–35°C. Keep opened packaging tightly closed. Consult the current SDS for handling, spill control and personal protection.

About Bluwat Chemicals

Bluwat Chemicals is a China-based manufacturer and exporter of water treatment chemicals and functional polymers. Our business began in 2000, Bluwat was formally established in 2002, and our Yixing factory began production in 2004. We operate three production bases, including Yixing and Huaibei, and have supplied a cumulative 800,000 tonnes of products to customers in around 100 countries and regions. Our portfolio includes BWD-01 Water Decoloring Agent, PAM powder and emulsions, PolyDADMAC, Polyamine, PAC, Ferric Sulphate and ACH.

Why choose Bluwat Chemicals

Manufacturing and export experience

Our production and export background supports technical communication and supply planning for overseas industrial buyers.

Application-focused selection

We help customers compare wastewater or process conditions, treatment objectives and suitable chemical combinations before choosing a product.

Broad treatment portfolio

Our coagulants, flocculants and specialty chemicals support projects in oil and gas, mining, textiles, pulp and paper, and municipal water treatment.

Quality and purchasing clarity

Our ISO 9001 quality management system and agreed grade specifications provide a basis for purchasing discussions. Application performance is verified through the relevant trials.

Frequently asked questions

Does the two-year shelf life apply to prepared polymer solution

No. It refers to the packaged powder stored under recommended conditions. Prepare solution according to site needs and verify its condition before use; the TDS does not specify a two-year solution storage life.

Can a single funnel-viscosity result determine the APAM grade

It is a useful field indicator but does not describe the full flow behavior. Compare rotational rheology, gels, filtration and pumping response before selecting a grade.

Does 89% minimum solids guarantee a particular mud viscosity

No. Solids content is a supply specification. Mud viscosity also depends on grade, concentration, water quality, temperature and the other components in the formulation.

Request product selection and a quotation

Send Bluwat your base-mud formulation, water analysis and viscosity targets to request an APAM grade recommendation, sample evaluation and a quotation for 25 kg PE bags.

Tags:

Water Purifying Chemicals

Water Decoloring Agent