products details

Home Products

89% Min Solid Anionic Polyacrylamide APAM 5-25 Million MW Drilling Mud Additive for Drilled Cuttings Encapsulation

Brand Name:	Blufloc
MOQ:	1000kgs
Price:	Negotiation
Delivery Time:	10 working days after received your payment
Payment Terms:	T/T or L/C

Detail Information

Product Description

Detail Information

Place of Origin:

China

Certification:

ISO/HALAL/ZDHC

Full Name:

Polyacrylamide Powder

Brand Name:

BLUFLOC

Appearance:

White Powder

Ionic Character:

Anionic

Polymer Type:

Water-Soluble Anionic Copolymer

Product Category:

Drilling Fluid Additive

Application Grade:

Industrial And Oilfield Drilling Grade

Particle Size:

20–100 Mesh

Molecular Weight:

5–25 Million Across The Anionic Grade Family

Anionic Degree:

5–100% Across The Anionic Grade Family

Solid Content:

89% Minimum

Shelf Life:

2 Years

Packaging Details:

25 kg PE bag, 25 kg kraft paper bag, 750 kg net big bags

Supply Ability:

5,000MT per month

Highlight:

89% Min Solid Anionic Polyacrylamide

5-25 Million MW APAM

Drilled Cuttings Encapsulation Drilling Mud Additive

Product Description

BLUFLOC ANIONIC POLYACRYLAMIDE

Product overview

Cuttings that disintegrate during circulation create additional fine solids that are harder to remove at the surface. An encapsulating polymer is selected to interact with suitable cuttings surfaces and help reduce their dispersion during transport. This function must be assessed separately from simply making the mud thicker.

Bluwat offers anionic polymer options for formulation trials. The TDS family range is a starting point for comparison, rather than evidence that all grades provide the same coating behavior. Confirm a suitable drilling-grade chemistry and compare cuttings preservation in the intended mud before routine use.

89% minimum solids

20–100 mesh

25 kg kraft paper bag

Product benefits

Molecular-weight options

A broad molecular-weight family supports comparison of cuttings interaction, solution handling and rheological impact.

Flexible solution preparation

Powder supply allows the preparation concentration and addition method to be adapted to the mixing arrangement.

Application-based screening

Laboratory screening can connect polymer choice to recovered cuttings quality and downstream separation requirements.

Technical specifications

Parameter	Specification
Brand and product family	Blufloc anionic polyacrylamide powder
Chemical identity	Anionic polyacrylamide APAM; CAS 9003-05-8
Appearance	Off-white granular powder
Ionic charge	Anionic
Particle size	20–100 mesh
Molecular weight	5–25 million across the anionic grade family
Anionic degree	5–100% across the anionic grade family
Solid content	89% minimum
Residual monomer	0.05% maximum
pH of 1% aqueous solution	6–8
General solution preparation	0.1–0.5%; final treatment concentration is application dependent
Powder storage temperature	0–35°C
Powder shelf life	2 years under recommended storage conditions

Molecular weight and anionic degree are family ranges, not a single grade specification. Confirm the selected grade and agreed supply criteria before ordering. ISO 9001 refers to the manufacturer’s quality management system, not a guarantee of application performance.

Grade selection for this application

Evaluate cuttings size, shale or clay content, exposure time, fluid salinity and the expected mechanical history. Polymer demand may increase when fresh reactive surface area rises. A clean-water viscosity measurement alone does not show how much polymer remains available after contact with drilled solids.

Review the balance between preserving larger cuttings and controlling the fine-solids fraction. Compare shaker screen behavior, visible agglomeration and circulation properties. Avoid choosing a grade only because it produces the largest flocs in a beaker, since the drilling fluid must remain compatible with the whole solids-control train.

Application evaluation and use

Use representative cuttings and prepare a base-fluid control with the same salinity and inhibitor package as the proposed mud.

Screen selected APAM grades at several additions, using consistent cuttings mass, contact time and agitation.

Measure recovered cuttings mass and observe dispersion, surface condition and screen separation after the test.

Check aged fluid rheology and polymer consumption trends before setting replenishment criteria for a site trial.

Solution preparation and dosing

Use clean, compatible make-up water and add the powder gradually into an established mixing flow. Avoid dumping powder in one location, which can create lumps with dry cores. The TDS gives 0.1–0.5% as general solution-preparation guidance. If specified on an as-supplied powder mass basis, this corresponds to 1–5 kg of powder per 1,000 kg of final solution; agree the concentration basis for the project.

Allow approximately one hour of agitation as a starting reference, then confirm complete hydration. Water quality, temperature, grade and equipment affect the required time. The TDS’s 200–400 rpm reference is equipment dependent and should not be scaled to a different tank solely by rpm. Avoid severe shear after hydration. Determine the final treatment dosage through the application tests described above.

Packaging storage and handling

The featured packaging is a 25 kg kraft paper bag with an inner plastic liner. The TDS also lists 25 kg kraft paper or PE bags and 750 kg net big bags. Store powder dry, protected from direct sunlight and at 0–35°C. Keep opened packaging tightly closed. Consult the current SDS for handling, spill control and personal protection.

About Bluwat Chemicals

Bluwat Chemicals is a China-based manufacturer and exporter of water treatment chemicals and functional polymers. Our business began in 2000, Bluwat was formally established in 2002, and our Yixing factory began production in 2004. We operate three production bases, including Yixing and Huaibei, and have supplied a cumulative 800,000 tonnes of products to customers in around 100 countries and regions. Our portfolio includes BWD-01 Water Decoloring Agent, PAM powder and emulsions, PolyDADMAC, Polyamine, PAC, Ferric Sulphate and ACH.

Why choose Bluwat Chemicals

Manufacturing and export experience

Our production and export background supports technical communication and supply planning for overseas industrial buyers.

Application-focused selection

We help customers compare wastewater or process conditions, treatment objectives and suitable chemical combinations before choosing a product.

Broad treatment portfolio

Our coagulants, flocculants and specialty chemicals support projects in oil and gas, mining, textiles, pulp and paper, and municipal water treatment.

Quality and purchasing clarity

Our ISO 9001 quality management system and agreed grade specifications provide a basis for purchasing discussions. Application performance is verified through the relevant trials.

Frequently asked questions

Is encapsulation the same as flocculation

No. Encapsulation aims to limit cuttings dispersion through polymer interaction with their surfaces. Flocculation brings suspended particles together for separation. A polymer can influence both, but the desired process outcome differs.

Should the highest molecular weight always be selected

No. Higher molecular weight may also increase viscosity or sensitivity to handling. Select the grade using cuttings tests and the operating limits of the complete mud.

Can kraft paper bags be stored outdoors

Keep the bags dry, protected from direct sunlight and within the recommended 0–35°C storage range. The inner plastic liner does not replace suitable covered storage.

Request product selection and a quotation

Send cuttings information, mud chemistry and solids-control requirements to Bluwat for grade screening and a 25 kg kraft paper bag quotation.

Tags:

Water Purifying Chemicals

Water Decoloring Agent

Anionic Polyacrylamide

Cationic Polyacrylamide

Polyaluminium Chloride

Quaternary Ammonium Polymer

Nonionic Polyacrylamide

Color Removal Chemical

Drilling Mud Additives

Dicyandiamide Formaldehyde Resin

Polyelectrolyte Flocculant

Ferric Sulphate

Color Fixing Agent

Coagulant And Flocculant

Plant Based Deodorant

Anti Foaming Chemicals

Chemical Demulsifier