products details

Home Products

Cationic Polyacrylamide CPAM Powder 0.1-0.5% Working Solution for Palm Oil Mill Effluent Sludge Dewatering in 25kg PE Bag

Brand Name:	Blufloc
MOQ:	1000kgs
Price:	Negotiation
Delivery Time:	10 working days after received your payment
Payment Terms:	T/T or L/C

Detail Information

Product Description

Detail Information

Place of Origin:

China

Certification:

ISO/HALAL/ZDHC

Full Name:

Polyacrylamide Powder

Brand Name:

BLUFLOC

Appearance:

White Powder

Ionic Character:

Cationic

Polymer Type:

Water-Soluble Cationic Copolymer

Application Grade:

Textile Dyeing Wastewater Sludge Dewatering

Particle Size:

20–100 Mesh

Molecular Weight:

5–12 Million

Charege Degree:

5–80%

Solid Content:

89% Minimum

Shelf Life:

2 Years

Packaging Details:

25 kg PE bag, 25 kg kraft paper bag, 750 kg net big bags

Supply Ability:

5,000MT per month

Highlight:

CPAM for sludge dewatering

Cationic polyacrylamide 25kg bag

CPAM for palm oil effluent

Product Description

BLUFLOC CATIONIC POLYACRYLAMIDE

Short description

Blufloc CPAM is a powder cationic polymer for conditioning sludge from palm oil mill effluent treatment. The recommended make-up solution concentration is 0.1–0.5%. Select the grade using the actual sludge source, digestion state, residual oil and intended dewatering equipment.

Solution preparation: 0.1–0.5% 89% minimum solids 25 kg PE bag

Product overview

Palm oil mill effluent treatment systems may handle settled solids, anaerobically treated sludge and other organic residues. Fresh effluent, pond sludge and the feed to a mechanical dewatering unit are different materials. Their solids concentration, oil content and handling behavior can vary substantially.

A compatible CPAM grade can help aggregate fine organic sludge particles into flocs suitable for water release. Polymer conditioning is evaluated as one step within the existing solids management system. It does not replace oil recovery, biological treatment or the checks needed before any reuse of treated water or sludge.

Product benefits

POME sludge conditioning

Condition compatible POME sludge before mechanical separation.

Treatment-stage comparison

Compare grades for the actual treatment and digestion stage.

Consistent solution preparation

Use a defined 0.1–0.5% range for consistent solution preparation.

Complete dewatering assessment

Assess water release, solids retention and cake handling together.

Technical data

Parameter	Specification
Product family	Blufloc CPAM powder
Ionic character	Cationic
Appearance	Off-white granular powder
Particle size	20–100 mesh
Molecular weight	5–12 million depending on grade
Charge or ionic degree	5–80% cationic charge degree depending on grade
Solid content	89% minimum
Residual monomer	0.05% maximum
pH of 1% aqueous solution	4–6
Recommended solution concentration	0.1–0.5%
CAS reference	9003-05-8
Featured packaging	25 kg PE bag

Molecular weight and charge ranges describe the product family. Confirm the selected grade and current batch specification with Bluwat. The pH of a 1% product solution is a test parameter, not the required plant operating pH.

Application process

Collect representative sludge from the intended dewatering feed rather than from an unrelated pond location. Record solids, pH, temperature and residual oil conditions. Prepare CPAM solution separately and compare grades through drainage screening. Confirm promising results on the intended machine at realistic feed loading and after normal pumping and transfer.

Grade and dosage selection

The recommended solution concentration is not a fixed POME treatment dose. Determine polymer demand on a documented product and dry-solids basis. Oil-rich or highly aged sludge may respond differently from freshly generated biological sludge. Evaluate representative feed temperature; the powder's 0–35 °C storage specification does not establish a process temperature limit or heat-tolerance guarantee.

Performance evaluation

Measure cake dry solids, liquid suspended solids, throughput and polymer consumption per dry tonne. Note screen cleaning and cake handling behavior. If separated water returns to treatment or process use, assess the relevant oil, dissolved-organic and other water-quality requirements independently.

Solution preparation

Prepare a 0.1–0.5% solution by mass using clean water. Add powder gradually to moving water to avoid lumps. Allow around one hour for dissolution, adjusting for grade, water quality and temperature. The TDS gives 200–400 rpm as a mixing reference; adapt mixing to the actual tank and impeller. Avoid unnecessary high shear after dissolution. A 0.1% solution contains 1 kg of product per 1,000 kg of final solution. Select the treatment dose separately through controlled trials.

Packaging storage and handling

Featured packaging is a 25 kg PE bag with an inner plastic liner. Store the dry product sealed at 0–35 °C, protected from moisture and direct sunlight. The stated shelf life is two years under specified storage conditions. Reseal opened packaging and follow the current SDS for handling and spill cleanup.

Frequently asked questions

Is untreated POME the same as POME sludge?

No. Identify the specific effluent or sludge stream and the separation objective before selecting a grade.

Should CPAM be dosed as dry powder into POME sludge?

Prepare a fully dissolved solution first to support even distribution and reproducible conditioning.

Does 0.1–0.5% describe the dose to the sludge?

No. It is the recommended make-up solution range. Establish the treatment dose separately.

Can the dewatered cake be reused automatically?

No. Any reuse route requires assessment of the cake composition and the relevant process and end-use requirements.

About Bluwat Chemicals

Bluwat Chemicals is a China-based manufacturer and exporter of water treatment chemicals and functional polymers. Our business began in 2000, the company was formally established in 2002, and our Yixing factory began production in 2004. Our portfolio includes Blufloc PAM powder and emulsions, BWD-01 Water Decoloring Agent, PAC, PolyDADMAC, Polyamine and ACH. We help customers compare suitable products through wastewater characterization and application testing.

Discuss the current grade specification, quality documentation and trial requirements with Bluwat when selecting a product.

Discuss your application

Provide Bluwat with your POME treatment stage, sludge analysis and dewatering machine details to discuss suitable CPAM grades and a representative trial.

Tags:

Cationic Polyacrylamide CPAM 20-100 Mesh 89% Min Solid for Food Processing Wastewater Sludge Dewatering CAS 9003-05-8 ISO 9001 Manufacturer 25kg PE Bag

Get Best Price

Cationic Polyacrylamide CPAM 5-80% Charge Degree for Distillery Wastewater Sludge Conditioning CAS 9003-05-8 ISO 9001 Manufacturer 25kg PE Bag

Get Best Price

Cationic Polyacrylamide CPAM 5-12 Million MW 89% Min Solid for Brewery Wastewater Sludge Dewatering CAS 9003-05-8 ISO 9001 Manufacturer 25kg Kraft Paper Bag

Get Best Price

Cationic Polyacrylamide CPAM pH 4-6 in 1% Solution for Textile Dyeing Wastewater Sludge Dewatering in 750kg Net Big Bag

Get Best Price

Cationic Polyacrylamide CPAM Off-White Granular Powder 20-100 Mesh for Leather Tannery Sludge Dewatering CAS 9003-05-8 ISO 9001 Manufacturer 25kg PE Bag

Get Best Price

89% Minimum Solid Content Cationic Polyacrylamide CPAM with 2-Year Shelf Life for Garment Washing ETP Sludge Conditioning

Get Best Price

Cationic Polyacrylamide CPAM Powder for Denim Washing Wastewater Sludge Dewatering with 89% Minimum Solid Content in 25kg PE Bag

Get Best Price

Water Purifying Chemicals

Water Decoloring Agent

Anionic Polyacrylamide